Casing Length Calculator Program

Where to buy, how to use. Stuffers, casings, spices, grinders, etc.

Re: Casing Length Calculator Program

Postby LGSpade » Wed Aug 07, 2013 11:58 pm

I know this is an old thread, but being a newbie I just came
across it.
And I can say it is most helpful, as I've no idea how much
casing to prepare and no doubt would always have too much.
I've saved it and can now refer to it each time.
Thanks for sharing.

Gary.
"The dog that trots about gets the bone"
LGSpade
Registered Member
 
Posts: 9
Joined: Tue Aug 06, 2013 10:21 am
Location: Nth. Queensland. Australia.

Re: Casing Length Calculator Program

Postby TonyE » Thu Nov 06, 2014 10:44 am

Can anybody tell me if the Casing Length Calculator Program runs under Windows 8


Thanks in advance - Tony
TonyE
Registered Member
 
Posts: 131
Joined: Tue Nov 29, 2005 10:24 am
Location: Calne, Wiltshire

Re: Casing Length Calculator Program

Postby Oddbod » Sat Jun 25, 2016 10:21 pm

Is this calculator available elsewhere, as the original link now says "page not found"?
Oddbod
Registered Member
 
Posts: 14
Joined: Wed Nov 11, 2015 7:09 am

Re: Casing Length Calculator Program

Postby wheels » Sat Jun 25, 2016 11:52 pm

PM me. I think I have it somewhere.

Phil
User avatar
wheels
Global Moderator
 
Posts: 12894
Joined: Sat Sep 02, 2006 4:29 pm
Location: Leicestershire, UK

Re: Casing Length Calculator Program

Postby Odin » Thu Feb 15, 2018 2:49 pm

Is this caculator here anywhere?
Odin
Registered Member
 
Posts: 70
Joined: Tue Jan 23, 2018 6:41 pm
Location: East Coast USA

Re: Casing Length Calculator Program

Postby wheels » Sat Feb 17, 2018 12:29 am

It's not, but this does the same thing. I've just copied the original calculator specs, so can't comment on it's accuracy:

http://www.localfoodheroes.co.uk/casing/

HTH

Phil
User avatar
wheels
Global Moderator
 
Posts: 12894
Joined: Sat Sep 02, 2006 4:29 pm
Location: Leicestershire, UK

Re: Casing Length Calculator Program

Postby Odin » Sat Feb 17, 2018 3:01 pm

Wheels thanks this will be very helpful.
Odin
Registered Member
 
Posts: 70
Joined: Tue Jan 23, 2018 6:41 pm
Location: East Coast USA

Re: Casing Length Calculator Program

Postby wheels » Sat Feb 17, 2018 3:40 pm

Please give me feedback as to the casing type, size and capacity lb/yard or similar. I'm trying to develop a more accurate calculator geared to casing size. For example sheep's can be anything from (say) 18mm to 28mm so the capacity will vary greatly. The more info I can collate, the more accurate it will be.

Phil
User avatar
wheels
Global Moderator
 
Posts: 12894
Joined: Sat Sep 02, 2006 4:29 pm
Location: Leicestershire, UK

Re: Casing Length Calculator Program

Postby Odin » Sat Feb 17, 2018 5:53 pm

Wheels

The casings I purchased only say they will fill 100 pounds of meat. There is no length labeled on the packages only weight. My beef middlings are labeled 29/32mm and 38/40mm. Sheep casings 20/22mm. Beef bung 4.5 inches. It would be nice if you could get the casing sizing the Local Hero’s used in thier caculator.
Odin
Registered Member
 
Posts: 70
Joined: Tue Jan 23, 2018 6:41 pm
Location: East Coast USA

Re: Casing Length Calculator Program

Postby Odin » Sat Feb 17, 2018 6:15 pm

Wheels

Maybe this will help you I got it from Walton’s supply.


Natural Sheep Casings
100 yards of natural sheep casings per package/hank
22-24mm diameter capacity of 40-50 lb
24-26mm diameter capacity of 60-65 lb
26-28mm diameter capacity of 62-68 lb
Packed in salt
Country of origin is New Zealand
These should be refrigerated for storage

Natural Hog Casings
110 yards of natural hog casings per package/hank
32-35mm diameter capacity of 125 lb
35-38mm diameter capacity of 135 lb
38-42mm diameter capacity of 150 lb
Packed in salt
Averages 13 strands per package/hank
Country of origin is either USA or Denmark
Odin
Registered Member
 
Posts: 70
Joined: Tue Jan 23, 2018 6:41 pm
Location: East Coast USA

Re: Casing Length Calculator Program

Postby wheels » Sat Feb 17, 2018 8:01 pm

Thank you, I'll add it to my database.

Phil
User avatar
wheels
Global Moderator
 
Posts: 12894
Joined: Sat Sep 02, 2006 4:29 pm
Location: Leicestershire, UK

Re: Casing Length Calculator Program

Postby DanMcG » Sat Feb 17, 2018 11:17 pm

Here's some info from Syracuse Casing if it helps Phil. Funny it doesn't match what Odin posted
100 yd's 29/32... 90-100 lbs
100 yd's 32/35....100-110 lbs
100 yd's 35/38....120-130 lbs
100 yd's 38/42....120-140 lbs
100 yd's 42+.......130-150 lbs
User avatar
DanMcG
Registered Member
 
Posts: 1461
Joined: Mon Dec 15, 2008 11:09 pm
Location: Central NY, USA

Re: Casing Length Calculator Program

Postby DanMcG » Sat Feb 17, 2018 11:24 pm

Heck, might as well add the sheeps.
All in a hundred yard hank.
18/20...30-40
20/22....40-50
22/24....50-60
24/26. ..60-70
26/28....70-80
28+.......80-90
User avatar
DanMcG
Registered Member
 
Posts: 1461
Joined: Mon Dec 15, 2008 11:09 pm
Location: Central NY, USA

Re: Casing Length Calculator Program

Postby wheels » Sun Feb 18, 2018 8:31 pm

Many thanks

DanMcG wrote:...Funny it doesn't match what Odin posted


That's the problem - hence me wanting members actual experiences of lb/yard, kg/m etc.

Phil
User avatar
wheels
Global Moderator
 
Posts: 12894
Joined: Sat Sep 02, 2006 4:29 pm
Location: Leicestershire, UK

Re: Casing Length Calculator Program

Postby DanMcG » Mon Feb 19, 2018 8:33 am

I'm overdue for making something, I'll take some notes and get back to ya Phil.
User avatar
DanMcG
Registered Member
 
Posts: 1461
Joined: Mon Dec 15, 2008 11:09 pm
Location: Central NY, USA

PreviousNext

Return to Equipment & Supplies

Who is online

Users browsing this forum: No registered users and 2 guests