Black Pudding mix

Introductions and chatter

re -blackpudding mix

Postby Ken Boy » Wed Feb 01, 2006 7:40 pm

Hi Paul
Now the problem seems to be sorted out with the mix plus the instructions on how to make it .
I will have ago at making some. A couple of questions I would like to ask the casings in your picture's what are they called ! plus how do you stuff them with the mix
I have is a hand crank mincer e.g with basic sausage filler tubes.
My local butcher said he will help me out with some back fat when I need some :roll: :roll: :roll:
Ken boy
Ken Boy
Registered Member
 
Posts: 242
Joined: Mon Aug 29, 2005 9:01 pm
Location: Southern England

Postby Paul Kribs » Thu Feb 02, 2006 6:20 am

Ken Boy

The smaller casings in question are ox runners and the larger ones are shrinkable black plastic ones.
As for stuffing them, the first mix I was able to stuff using my small plastic sausage stuffer. The technique involves making sure to put the casing on the filler tuber and tie a knot BEFORE putting the mix in the stuffer.. always remembering to keep the stuffer at a suitable angle, that the mix doesn't run out, until the piston is in place.
The larger casings can be filled with a jug, making sure to turn over the top inch or so to stop the casing from collapsing during filling. Then tying off at a suitable length with twine.
An alternative method for both types of casing is to use a jug and funnel.
I have not made any more puddings since being informed to use hot water for the mix, so cannot comment on it yet.

Regards, Paul Kribs
User avatar
Paul Kribs
Registered Member
 
Posts: 1588
Joined: Tue Apr 12, 2005 11:41 am
Location: South London, England

Postby Carl » Thu Feb 02, 2006 7:41 pm

Hi, Good news the hot water works fine and makes great Black Pudding.
Never trust a thin cook
Carl
Registered Member
 
Posts: 57
Joined: Sat Feb 12, 2005 5:25 pm
Location: Hull

Postby Ken Boy » Thu Feb 02, 2006 9:21 pm

Hi Paul
Thankyou for infomation on the casings are the larger casings the black shrinkable plastic available to order from anywere or do you have to be in the trade to obtain these casings :?:
Ken boy
Ken Boy
Registered Member
 
Posts: 242
Joined: Mon Aug 29, 2005 9:01 pm
Location: Southern England

Postby Ken Boy » Thu Feb 02, 2006 9:21 pm

Hi Paul
Thankyou for infomation on the casings are the larger casings the black shrinkable plastic available to order from anywere or do you have to be in the trade to obtain these casings :
Ken boy
Ken Boy
Registered Member
 
Posts: 242
Joined: Mon Aug 29, 2005 9:01 pm
Location: Southern England

re -blackpudding mix

Postby Ken Boy » Thu Feb 02, 2006 9:22 pm

Hi Paul
Thankyou for infomation on the casings are the larger casings the black shrinkable plastic available to order from anywere or do you have to be in the trade to obtain these casings :
Ken boy
Ken Boy
Registered Member
 
Posts: 242
Joined: Mon Aug 29, 2005 9:01 pm
Location: Southern England

re -blackpudding mix

Postby Ken Boy » Thu Feb 02, 2006 9:22 pm

Hi Paul
Thankyou for infomation on the casings are the larger casings the black shrinkable plastic available to order from anywere or do you have to be in the trade to obtain these casings :
Ken boy
Ken Boy
Registered Member
 
Posts: 242
Joined: Mon Aug 29, 2005 9:01 pm
Location: Southern England

re -blackpudding mix

Postby Ken Boy » Thu Feb 02, 2006 9:22 pm

Hi Paul
Thankyou for infomation on the casings are the larger casings the black shrinkable plastic available to order from anywere or do you have to be in the trade to obtain these casings :
Ken boy
Ken Boy
Registered Member
 
Posts: 242
Joined: Mon Aug 29, 2005 9:01 pm
Location: Southern England

re -blackpudding mix

Postby Ken Boy » Thu Feb 02, 2006 9:29 pm

WHOOOOP'S
ERROR ON SUBMIT MAIL :oops: :oops: :oops:
Ken boy
Ken Boy
Registered Member
 
Posts: 242
Joined: Mon Aug 29, 2005 9:01 pm
Location: Southern England

Postby unclejoes96 » Thu Feb 02, 2006 10:06 pm

Ken Boy

All types of casings can be purchased from the scobiesdirect website.

Hope this helps
unclejoes96
Registered Member
 
Posts: 20
Joined: Sat Apr 16, 2005 9:24 am
Location: Kent

Postby Paul Kribs » Fri Feb 03, 2006 6:21 am

Carl

How hot was the water you used, was it boiling?

Regards, Paul Kribs
User avatar
Paul Kribs
Registered Member
 
Posts: 1588
Joined: Tue Apr 12, 2005 11:41 am
Location: South London, England

re -blackpudding mix

Postby Ken Boy » Fri Feb 03, 2006 5:25 pm

uncle joes 96
thanks for information on casings :wink:
Ken boy
Ken Boy
Registered Member
 
Posts: 242
Joined: Mon Aug 29, 2005 9:01 pm
Location: Southern England

Postby Carl » Fri Feb 03, 2006 7:30 pm

No the water I used was just to hot to put your hand in, but it's a good question what is hot?
Never trust a thin cook
Carl
Registered Member
 
Posts: 57
Joined: Sat Feb 12, 2005 5:25 pm
Location: Hull

re -blackpudding mix

Postby Ken Boy » Fri Feb 10, 2006 7:57 pm

Hi
How much room should I leave for expansion for cooking when filling up caseings with the mix
I am useing the black plastic type shrinkable ones any help would be welcome please :( :( :( :oops: :oops:
Ken boy
Ken Boy
Registered Member
 
Posts: 242
Joined: Mon Aug 29, 2005 9:01 pm
Location: Southern England

Postby unclejoes96 » Fri Feb 10, 2006 9:31 pm

I always use that type of casing and have never left any space, unlike
natural casings that will split, these ones seem very tough. never had a split yet ! touch wood
unclejoes96
Registered Member
 
Posts: 20
Joined: Sat Apr 16, 2005 9:24 am
Location: Kent

PreviousNext

Return to Chatter

Who is online

Users browsing this forum: No registered users and 3 guests