Curing previously frozen pork belly?

Air dried cured Meat Techniques

Re: Curing previously frozen pork belly?

Postby BriCan » Fri Mar 18, 2016 5:27 am

NCPaul wrote:Drop the temperature to 40 F (4 C) and it should be fine.

40 F is IMMHO a tad too cold and damp for aging/maturing :( -- 48 F. is much better but as I said above 55 degrees F is fine just need good gentle air circulation :)
But what do I know
User avatar
BriCan
Registered Member
 
Posts: 2203
Joined: Wed Apr 07, 2010 12:07 am
Location: West Coast of Canada

Re: Curing previously frozen pork belly?

Postby wheels » Sat Mar 19, 2016 4:42 pm

I agree with Brican - I do it in my air-drying fridge at about 12°C.

That said, I've also done it in a domestic fridge at <5°C with no humidity control, but wrapped loosely in parchment. It needs care ful watching though, and turning regularly, to avoid (bad) mould.

Phil
User avatar
wheels
Global Moderator
 
Posts: 12890
Joined: Sat Sep 02, 2006 4:29 pm
Location: Leicestershire, UK

Re: Curing previously frozen pork belly?

Postby johngaltsmotor » Thu Apr 07, 2016 1:59 am

Ok, next question: I've got limited access to an electric smoker. So the 4 hours per day for 3 days is out for this batch. If you guys had to do a single session cold smoking how long would you go?
Pigs are magical creatures.... they turn vegetables into BACON!!
johngaltsmotor
Registered Member
 
Posts: 304
Joined: Tue Aug 28, 2012 7:26 pm
Location: NW Ohio, USA

Re: Curing previously frozen pork belly?

Postby Swing Swang » Thu Apr 07, 2016 6:13 am

If your smoke is 'thin' then increase the smoking time to 10 hours. I generate very thin smoke and can do 10 times 10 hour smokes over two weeks with no off flavours. What I wouldn't do is try and speed things up by generating lots of thick smoke. If you can't have the smoker for as long as you'd like then you're better off living with a less smokey final product in my opinion.
User avatar
Swing Swang
Registered Member
 
Posts: 257
Joined: Fri Jun 13, 2014 12:56 pm
Location: Cornwall, UK

Re: Curing previously frozen pork belly?

Postby NCPaul » Thu Apr 07, 2016 10:18 am

I agree with Swing Swang. I routinely go that long.
Fashionably late will be stylishly hungry.
NCPaul
Site Admin
 
Posts: 2918
Joined: Thu Oct 01, 2009 12:58 am
Location: North Carolina

Re: Curing previously frozen pork belly?

Postby Shuswap » Thu Apr 07, 2016 1:46 pm

If you look back at Brican's Mar 16 post (page 1 of this thread) the first photo shows that he used a bone in belly pulling the bones and leaving the associated meat on the belly. Clever eh!
Shuswap
Registered Member
 
Posts: 55
Joined: Tue Aug 20, 2013 6:55 pm
Location: British Columbia, Canada

Re: Curing previously frozen pork belly?

Postby wheels » Thu Apr 07, 2016 4:29 pm

You can buy rib-pullers specifically for this:

http://www.weschenfelder.co.uk/rib-puller.html

Phil
User avatar
wheels
Global Moderator
 
Posts: 12890
Joined: Sat Sep 02, 2006 4:29 pm
Location: Leicestershire, UK

Re: Curing previously frozen pork belly?

Postby onewheeler » Sat Apr 09, 2016 8:07 pm

What's that rib-puller made of Phil, and how does it work? It looks like it's knitted in the Weschenfelder picture!
User avatar
onewheeler
Registered Member
 
Posts: 456
Joined: Sun Nov 16, 2008 1:40 pm
Location: Nympsfield, Gloucestershire most of the time

Re: Curing previously frozen pork belly?

Postby johngaltsmotor » Sat Apr 09, 2016 9:06 pm

Well turns out the smoker didn't have independent temp and smoke. So I'm going to use my smoker wroth the aluminum dryer vent to cold smoke for a second time tomorrow. Didn't get as much smoke today as hoped. Just more incentive to build a dedicated cold smoke house ;-)
Pigs are magical creatures.... they turn vegetables into BACON!!
johngaltsmotor
Registered Member
 
Posts: 304
Joined: Tue Aug 28, 2012 7:26 pm
Location: NW Ohio, USA

Re: Curing previously frozen pork belly?

Postby wheels » Sat Apr 09, 2016 11:38 pm

onewheeler wrote:What's that rib-puller made of Phil, and how does it work? It looks like it's knitted in the Weschenfelder picture!


I have one, it's a nylon loop on a plastic handle.

It would be easy enough to make similar with a chunk of wood.

In my experience, you still have to go most of the way to cutting the bones out. It's only the last bit that's done with the puller.

However, I'm not very strong, so others may be able to do it differently.

That said, it looks like Brican has cut down both sides of the bones before using the puller.
HTH

Phil
User avatar
wheels
Global Moderator
 
Posts: 12890
Joined: Sat Sep 02, 2006 4:29 pm
Location: Leicestershire, UK

Re: Curing previously frozen pork belly?

Postby wheels » Sat Apr 09, 2016 11:44 pm

johngaltsmotor wrote:Well turns out the smoker didn't have independent temp and smoke. So I'm going to use my smoker wroth the aluminum dryer vent to cold smoke for a second time tomorrow. Didn't get as much smoke today as hoped. Just more incentive to build a dedicated cold smoke house ;-)


That's disappointing for you, but don't be too struck on lots of smoke. A little smoke for a long time is a lot better than a lot of smoke for a short time.

Phil
User avatar
wheels
Global Moderator
 
Posts: 12890
Joined: Sat Sep 02, 2006 4:29 pm
Location: Leicestershire, UK

Re: Curing previously frozen pork belly?

Postby johngaltsmotor » Sun Apr 10, 2016 1:35 am

Problem is the smoke was intermittent. To make smoke the controller needed a higher temp setting but we had to leave the door open so that it didn't actually get the meat warm. Out of 6 hours of smoking we got maybe 2.5 hours of actual light smoke.
Pigs are magical creatures.... they turn vegetables into BACON!!
johngaltsmotor
Registered Member
 
Posts: 304
Joined: Tue Aug 28, 2012 7:26 pm
Location: NW Ohio, USA

Re: Curing previously frozen pork belly?

Postby Shuswap » Sun Apr 10, 2016 1:48 pm

onewheeler wrote:What's that rib-puller made of Phil, and how does it work? It looks like it's knitted in the Weschenfelder picture!

Here's a video:
https://www.youtube.com/watch?v=h1YmhrsTjI0
Shuswap
Registered Member
 
Posts: 55
Joined: Tue Aug 20, 2013 6:55 pm
Location: British Columbia, Canada

Re: Curing previously frozen pork belly?

Postby onewheeler » Sun Apr 10, 2016 4:56 pm

Thanks Phil & Shuswap. The video following that one https://www.youtube.com/watch?v=Ze3JvHoI8v8&nohtml5=False has a beast of an electromechanical one. Impressive!

The manual one looks more like a device for separating the ribs cleanly than actually pulling them out, but handy anyway. I'll try making one, it's bacon time soon. :drool:

Martin/
User avatar
onewheeler
Registered Member
 
Posts: 456
Joined: Sun Nov 16, 2008 1:40 pm
Location: Nympsfield, Gloucestershire most of the time

Re: Curing previously frozen pork belly?

Postby johngaltsmotor » Thu Apr 14, 2016 5:12 pm

You guys make it look easy to filet the rind off after curing and smoking but I'm not so convinced... That is on tonight's agenda so I can toss them in the freezer to stiffen them up for slicing. But the rind seems just as flexible as the fat right now so getting a clean and easy cut might be a challenge. I think next time I'll pay the extra 10cents/pound to get them already skinned (and hopefully they don't remove too much of that glorious fat along with it...)
Pigs are magical creatures.... they turn vegetables into BACON!!
johngaltsmotor
Registered Member
 
Posts: 304
Joined: Tue Aug 28, 2012 7:26 pm
Location: NW Ohio, USA

PreviousNext

Return to Curing Techniques

Who is online

Users browsing this forum: Google [Bot] and 10 guests