Bresaola

Beginners FAQ on sausage making, meat curing etc may often be found at the head of each relevant section, but here is the place to ask experienced users for advice if you are still stuck or need more information...we're here to help!

Postby Rik vonTrense » Fri Apr 14, 2006 5:32 am

curious as to what Bresaola was ...never having heard of it before today I looked up on google.....when they talk of top eye are they refering to the eye in rib eye beef and amn I to assume that only the eye is used ??

This is a recipe given on there .


ngredients:
10-12 Lb. Beef top round - trimmed of all fat
4-5 Liters Red wine - inexpensive burgundy
2.5 Lb. Coarse salt
12 Branches Rosemary - each about 6-8 inches.
1 Lg. Thyme - bunch
6-8 Bay leaves
2 Lg. Carrots - quartered
2 Lg. Onions - white
6-8 Lg. Garlic cloves - crushed
1/2 Cup Peppercorns - black
1/2 Cup Juniper berries - crushed
1 Tbl. Pepper flakes - hot
2 Oranges worth of orange peel

Preparation of the Marinade

Put all of the ingredients except the meat into a tub - plastic or otherwise - large enough to hold the marinade and the meat. Mix well for a minute or two.

Preparation of the Bresaola

Place the meat in the marinate. All of the meat should be covered. Cover the container and place at the back of the refrigerator. Leave for a week or until the meat feels quite firm. (We have left it for as long as ten days as the refrigerator used is cooler than a basement or root cellar. ) Turn the beef over once at the mid-cycle of the marinating process. At the end of the marinade period, remove from the marinade, dry and wrap in two layers of cheesecloth. Hang in a cool place to dry. Place paper on the floor as the meat drips a bit during the first few days of drying. The meat should be hanged for at least a 3 weeks. At the end of this time the meat should feel firm with no give when you press with your fingers. (We have let two 9 pound bresaolas hang for as long as a month and they were excellent.) For a 12 pound top round, three weeks should be sufficient, but we cannot offer a definitive time period. The firmness test is the best method to judge readiness. Mold may form during the drying process.

When drying is complete, remove all of the white mold [See Preserving note above] with a brush and scrapper. Wash the Bresaola with vinegar. Pat dry and rub the entire bresaola with olive oil. Wrap in grease proof paper, and keep in the refrigerator.

Serve sliced very thinly. We suggest it be served with arugula, olive oil and shaved parmesan. Alternatively serve with salsa verde, or wrap it around quartered figs. [For a richer taste, top each fig quarter with a teaspoon of teleme cheese, then wrap the bresaola around the fig and cheese.] Alternatively, crisp some bresaola, break into small pieces and make a salad of spinach, Radicchio, and pine nuts dressed with olive oil and balsamic vinegar. .




.
Rik vonTrense
User avatar
Rik vonTrense
Registered Member
 
Posts: 558
Joined: Sat Feb 18, 2006 6:18 pm
Location: GOFFS OAK..SE HERTS

Postby aris » Fri Apr 14, 2006 7:07 am

Breasola is round, and has no fat or sinews at all. Len polis site recommends to use sirloin:

http://lpoli.50webs.com/index_files/bresaola.pdf

My local italian restaurant does an excellent breasola & rucola (rocket) pizza.
aris
Site Admin
 
Posts: 1875
Joined: Fri Jul 16, 2004 12:36 pm
Location: UK

Postby Paul Kribs » Fri Apr 14, 2006 7:47 am

I don't think it matters too much wether you use sirloin, rib eye, silverside or topside, provided all silverskin, fat, grisle and sinew are removed. As we all know, if silverskin, grisle and sinew are left on meat then it becomes so hard that it becomes quite unpalatable.
I wonder more about different recipes where one calls for the cured meat to be put into casings and the other does not. Maybe it is just to facilitate hanging for maturing it..

Regards, Paul Kribs
User avatar
Paul Kribs
Registered Member
 
Posts: 1588
Joined: Tue Apr 12, 2005 11:41 am
Location: South London, England

Postby jpj » Sat Apr 15, 2006 7:08 am

duck breasts go nicely through the bresaola process - with greatly reduced curing and maturing times of course.

casings will make it easier to remove the outer layer of mold that may develop. my latest batch got whited by the mold in a matter of days, but i like to eat it, so no bother
User avatar
jpj
Registered Member
 
Posts: 358
Joined: Fri Apr 15, 2005 7:28 pm
Location: breckland bandit country

Postby Paul Kribs » Sat Apr 15, 2006 7:57 am

Thanks for the info jpj, I think I will stick with the recipe I am following and go with no casings. My casings are 2�", so I would have a job getting the meat in anyway, and I don't want to start trimming it to get it to fit. I don't mind the white mould that appears on cured meat.

Once it has dried, have you got any idea regards, shelf life. I have vacuum packing facilities. Does it freeze OK? My son is visiting at the end of July and I was hoping to reserve one for then.

Regards, Paul Kribs
User avatar
Paul Kribs
Registered Member
 
Posts: 1588
Joined: Tue Apr 12, 2005 11:41 am
Location: South London, England

Postby aris » Sat Apr 15, 2006 8:05 am

I wonder if smearing the breasola with lard (or dripping) might work instead of using a collagen casing? Might help with preventing mould, and also perhaps help regulate the rate of dehydration.
aris
Site Admin
 
Posts: 1875
Joined: Fri Jul 16, 2004 12:36 pm
Location: UK

Postby Paul Kribs » Sat Apr 15, 2006 8:13 am

Did wonder that myself, bearing in mind it is recommended when using the Parma style cure.

Regards, Paul Kribs
User avatar
Paul Kribs
Registered Member
 
Posts: 1588
Joined: Tue Apr 12, 2005 11:41 am
Location: South London, England

Postby vinner » Sun Apr 16, 2006 10:27 pm

My bresaola is 8 days into a 25 day maging process, some moisture evaporation eident, and a nice, fine white mold starting. I'll let you know how it turns out.
" To be the stewards of what we have been given, to reap what we sow, to enjoy the harmony of it all.

me
vinner
Registered Member
 
Posts: 554
Joined: Fri Mar 31, 2006 12:22 am
Location: Texas

Postby vinner » Sun Apr 16, 2006 10:46 pm

Regrding shelf life, my research said one year without refigeration if it does not get too hot (which tends to dry out the meat.... it's creamy texture being part if its appeal). The process of dry curing gives a similar shelf life as salami. Some recipes say smear it with olive oil after aging and wrap in butcher paper. It should freeze if you need to, but that can also dry it out.

Len Poli says he uses collagen casings most of the time. He splits them, wraps them around the cured meat, then ties with twine. He also slips them into elastic roast netting for shape. He also informed that he will age with only the netting at times.

Bought some at my local deli before I made mine which was the impetus to make it with Axis venison (of which I have an abundance, along with Texas wild boar). It was delish...... cured tasting, with a Parma texture. I used Len's dry cure recipe.
" To be the stewards of what we have been given, to reap what we sow, to enjoy the harmony of it all.

me
vinner
Registered Member
 
Posts: 554
Joined: Fri Mar 31, 2006 12:22 am
Location: Texas

Postby Paul Kribs » Mon Apr 17, 2006 6:53 am

vinner

Thanks for the info.

Regards, Paul Kribs
User avatar
Paul Kribs
Registered Member
 
Posts: 1588
Joined: Tue Apr 12, 2005 11:41 am
Location: South London, England

Postby jpj » Wed Apr 19, 2006 10:22 pm

shelflife has never been an issue as it gets eaten rapidly. however anything over two kilos gets larded on its cutting face. i've got a huge batch on the go that i may go down the burying in wood ash route.
they do lose a lot of weight, i'm seeing 40-50%.

ps if anyone's got that 'silver spoon' book there's some nice ideas for what to do with bresaola
User avatar
jpj
Registered Member
 
Posts: 358
Joined: Fri Apr 15, 2005 7:28 pm
Location: breckland bandit country

Postby Paul Kribs » Sat Apr 22, 2006 7:58 am

After the 2 applications of cure etc, it has now been hanging in my workshop for a week and is drying nicely. I stuck to the recipe I am using and didn't stuff into casings. The white mold is now progressing, and as the top appeared drier than the bottom, I have turned them upside down. The widest part is still pretty soft, but that is to be expected

As can be seen in the pic, RH and Temp are pretty good, only slight changes in RH and temp now. Will now have to monitor more closely as 'those who know' say the temp is set to rise a fair bit.. 20�C or higher. I have took them at their word and got some sausages and burgers out for a BBQ. Found a vac pack of Lomo lurking in the freezer, that thawed in no time and tastes excellent, so it only needs me to bake some bread and dig out the corkscrew.. :wink:

Image


Regards, Paul Kribs
User avatar
Paul Kribs
Registered Member
 
Posts: 1588
Joined: Tue Apr 12, 2005 11:41 am
Location: South London, England

Postby vinner » Sat Apr 22, 2006 12:26 pm

Paul:

Thanks for the update. My "bresh" is completely covered in white mold, so I feel pretty good about the next 2 weeks to finalize it. I am 3 days into a 30 day curing of a whole, boneless prok loin in a Parma cure. I was wondering how I was to hang it, as I am pressing it fairly flat. It looks like your tying method will do the job, eh?
" To be the stewards of what we have been given, to reap what we sow, to enjoy the harmony of it all.

me
vinner
Registered Member
 
Posts: 554
Joined: Fri Mar 31, 2006 12:22 am
Location: Texas

Postby Paul Kribs » Sat Apr 22, 2006 12:50 pm

vinner

I would advise against rolling and tying the loin, but would rather mature it opened up. You could always pass some butchers twine trough it and make a loop for hanging if you don't have butchers hooks.

Regards, Paul Kribs
User avatar
Paul Kribs
Registered Member
 
Posts: 1588
Joined: Tue Apr 12, 2005 11:41 am
Location: South London, England

Postby aris » Sat Apr 22, 2006 1:33 pm

Paul - do you get any condensation in the biltong box? Have you covered up the holes to keep the humidity in?
aris
Site Admin
 
Posts: 1875
Joined: Fri Jul 16, 2004 12:36 pm
Location: UK

PreviousNext

Return to Beginners

Who is online

Users browsing this forum: No registered users and 0 guests