Bresaola

Beginners FAQ on sausage making, meat curing etc may often be found at the head of each relevant section, but here is the place to ask experienced users for advice if you are still stuck or need more information...we're here to help!

Postby Paul Kribs » Sat Apr 22, 2006 2:15 pm

aris

No, I haven't covered up the holes, and there is no discernable condensation. In fact, to obtain the correct RH, I had to wedge the door ajar by about 1". I still have salami's and chorizo's in there, so the Bresaola is hanging in the workshop, which is quite near the mark.. except the temp has risen to 20�C. I weighed the little salami today, it started at 400 grams and now weighs 288 grams, so almost a third gone.. and I pricked the casing to see if it would assist drying and it appears it has, or maybe due to the shorter size. It also has a more even covering of white mold than the others.

Regards, Paul Kribs
User avatar
Paul Kribs
Registered Member
 
Posts: 1588
Joined: Tue Apr 12, 2005 11:41 am
Location: South London, England

Postby Paul Kribs » Sat Apr 29, 2006 9:12 am

Another week has passed, with RH and temp good. As can be seen in the photo, 62% RH and 14.9�C. The white covering has thickened and there are some areas where the moisture is oozing out still. The recipe states at least 3 weeks hanging, so still a bit to go. The thinner ends are somewhat drier than the softer middle so when the time comes, I will vacuum pack and put them in the fridge for a week to evenly distribute the remaining moisture content.

Image

Regards, Paul Kribs
User avatar
Paul Kribs
Registered Member
 
Posts: 1588
Joined: Tue Apr 12, 2005 11:41 am
Location: South London, England

Postby welsh wizard » Tue Jan 02, 2007 5:24 pm

Hi Paul

Just looking through this part of the forum after your comments re bresaola and saw your hydro thermometer clock - may I ask where you got it from?

Cheers WW.
Only those who go too far know how far they can go TSE
User avatar
welsh wizard
Registered Member
 
Posts: 1459
Joined: Wed Mar 30, 2005 8:56 am
Location: Welsh Borders

Postby Paul Kribs » Tue Jan 02, 2007 5:44 pm

WW

I got it from Maplins, they have a store 5 mins from me, but they do sell online. http://www.maplin.co.uk/Module.aspx?ModuleNo=36148&criteria=HYgROMETER&doy=2m1
It's currently priced at �15.99, but has big numerals for my old eyes :shock:

Regards, Paul Kribs
User avatar
Paul Kribs
Registered Member
 
Posts: 1588
Joined: Tue Apr 12, 2005 11:41 am
Location: South London, England

Postby aris » Tue Jan 02, 2007 6:03 pm

Speaking of which - you never did tell us how it came out!
aris
Site Admin
 
Posts: 1875
Joined: Fri Jul 16, 2004 12:36 pm
Location: UK

Postby welsh wizard » Wed Jan 03, 2007 7:49 am

Thanks Paul for the link. It was the size that I found interesting because like you my arms are getting too short for my eyes!

Cheers WW.
Only those who go too far know how far they can go TSE
User avatar
welsh wizard
Registered Member
 
Posts: 1459
Joined: Wed Mar 30, 2005 8:56 am
Location: Welsh Borders

Postby Paul Kribs » Wed Jan 03, 2007 1:37 pm

aris

After it had cured, I vac-packed it. This had the effect of making the white mold all but dissappear after a few days.
I cut them in half to get a good starting edge for slicing. They were sliced really thin and even with the electric slicer. The colour was a nice deep red and it had a good flavour. I thought I had taken some photos, I normally do, but I can't find any on my PC. I would certainly recommend it.

Regards, Paul Kribs
User avatar
Paul Kribs
Registered Member
 
Posts: 1588
Joined: Tue Apr 12, 2005 11:41 am
Location: South London, England

Postby aris » Wed Jan 03, 2007 5:27 pm

So, in total, how long did you hang them for?

Do you recall what the before and after weights were?
aris
Site Admin
 
Posts: 1875
Joined: Fri Jul 16, 2004 12:36 pm
Location: UK

Postby Paul Kribs » Wed Jan 03, 2007 6:22 pm

Can't recall the weights, but followed the recipe and matured for 3 weeks after the initial 2 X 7 day curing periods. I do intend to make it again and will take proper notes. It goes down well with a bottle of S.A. pinotage, very nice on a warm evening outside. ( Pinotage by First Cape, sainsburys, only about �5 per bottle)

Regards, Paul Kribs
User avatar
Paul Kribs
Registered Member
 
Posts: 1588
Joined: Tue Apr 12, 2005 11:41 am
Location: South London, England

Postby Paul Kribs » Wed Nov 21, 2007 7:43 pm

Picture of finished product (since devoured). Yeah, I know it was ages ago.

Image

Regards, Paul Kribs
User avatar
Paul Kribs
Registered Member
 
Posts: 1588
Joined: Tue Apr 12, 2005 11:41 am
Location: South London, England

Postby saucisson » Wed Nov 21, 2007 8:48 pm

You're back :)

I'm pleased, if a bit confused...

Dave
User avatar
saucisson
Site Admin
 
Posts: 6851
Joined: Sat Mar 04, 2006 8:46 pm
Location: Oxford UK

Postby Oddley » Wed Nov 21, 2007 9:54 pm

Nice to see you back Paul. The Bresaola looks bloody lovely.
Being right, only comes from being wrong.
User avatar
Oddley
Registered Member
 
Posts: 2250
Joined: Sun Oct 03, 2004 10:58 pm
Location: Lost Dazed and Confused

Postby Oddley » Wed Nov 21, 2007 10:05 pm

Oh by the way, what joint of meat are you using for it.
Being right, only comes from being wrong.
User avatar
Oddley
Registered Member
 
Posts: 2250
Joined: Sun Oct 03, 2004 10:58 pm
Location: Lost Dazed and Confused

Postby TerryW » Wed Nov 21, 2007 10:25 pm

Well, it allowed me to log in a couple of times using the new Paul Kribs account, then won't let me use it with the old or new password.. ppfffttt.

Oddley, 2 small topsides.. will make another in the new year.. The first one was better as I sliced it using the electric slicer and the thinner slice has a better texture ie. you eat more..

Regards, Paul Kribs
TerryW
Registered Member
 
Posts: 3
Joined: Wed Nov 21, 2007 9:43 am

Postby Oddley » Wed Nov 21, 2007 10:49 pm

It don't matter who you are logged in as, we know who you are.

Yeah, topsides will give a nice tender piece of meat.
Being right, only comes from being wrong.
User avatar
Oddley
Registered Member
 
Posts: 2250
Joined: Sun Oct 03, 2004 10:58 pm
Location: Lost Dazed and Confused

PreviousNext

Return to Beginners

Who is online

Users browsing this forum: Bing [Bot] and 4 guests