Curing on the bone

Beginners FAQ on sausage making, meat curing etc may often be found at the head of each relevant section, but here is the place to ask experienced users for advice if you are still stuck or need more information...we're here to help!

Postby wheels » Fri Aug 21, 2009 1:25 pm

A great piece of work Oddley - as my kids say: "Respect".

Phil
User avatar
wheels
Global Moderator
 
Posts: 12894
Joined: Sat Sep 02, 2006 4:29 pm
Location: Leicestershire, UK

Postby saucisson » Fri Aug 21, 2009 2:34 pm

Fantastic, nice job Oddley, I was just going to try and come up with how much stout to use, now I might have to go out and buy some meat instead :D

Edit: What beer are people planning on using with this? I'm tempted to use stout, but I may see if I can relieve my brother in law of some of his stocks of Adnams Broadside :)

Dave
Curing is not an exact science... So it's not a sin to bin.

Great hams, from little acorns grow...
User avatar
saucisson
Site Admin
 
Posts: 6851
Joined: Sat Mar 04, 2006 8:46 pm
Location: Oxford UK

Postby Oddley » Fri Aug 21, 2009 3:08 pm

Please be aware, that the size of meat used was 9072 g - 20lb ham I just took off the bone skin and fat weight ie: 5897g meat left.

This cure is pretty tolerant, it will be fairly stable with most size meats, if you cure to half equilibrium.
Being right, only comes from being wrong.
User avatar
Oddley
Registered Member
 
Posts: 2250
Joined: Sun Oct 03, 2004 10:58 pm
Location: Lost Dazed and Confused

Postby saucisson » Fri Aug 21, 2009 3:21 pm

Can you scale down the volume to suit a smaller piece of meat? It's a lot of Broadside to waste on a pig :lol:
Curing is not an exact science... So it's not a sin to bin.

Great hams, from little acorns grow...
User avatar
saucisson
Site Admin
 
Posts: 6851
Joined: Sat Mar 04, 2006 8:46 pm
Location: Oxford UK

Postby Oddley » Fri Aug 21, 2009 3:33 pm

Dave, to be honest I don't know. Maybe tomorrow, I'll try to calculated different sizes to see how this effects ingoing amounts.

Unless someone else wants the job.
Being right, only comes from being wrong.
User avatar
Oddley
Registered Member
 
Posts: 2250
Joined: Sun Oct 03, 2004 10:58 pm
Location: Lost Dazed and Confused

Postby quietwatersfarm » Fri Aug 21, 2009 5:09 pm

Thats excellent Oddley,

Its bacon I'm after, given the probable higher percentage of fat, what would be the best way to adapt this do you think?
User avatar
quietwatersfarm
Registered Member
 
Posts: 902
Joined: Sat May 09, 2009 6:45 pm
Location: North Devon, England

Postby wheels » Fri Aug 21, 2009 5:19 pm

Other than trying to convert this to an 'Oddley's 2:1 ratio immersion cure', the cure would have to be calculated for each individual piece of meat. Although, no doubt a spreadsheet could be designed to do it.

I am happy to do calculate the cure on an individual basis for people.

I'll have a think about a spreadsheet, but at present I'm still playing with the 4 weeks cure, 6 weeks marinade (or similar dry/pump cure) for the Emmet's bacon/ham in pepperpig's original post - don't hold your breath though - I may never get there!

Phil
User avatar
wheels
Global Moderator
 
Posts: 12894
Joined: Sat Sep 02, 2006 4:29 pm
Location: Leicestershire, UK

Postby Oddley » Fri Aug 21, 2009 5:29 pm

I'll leave this to wheels as he seem enthusiastic about it... :D
Being right, only comes from being wrong.
User avatar
Oddley
Registered Member
 
Posts: 2250
Joined: Sun Oct 03, 2004 10:58 pm
Location: Lost Dazed and Confused

Postby PepperPig » Fri Aug 21, 2009 6:30 pm

I have faith, Phil. :D


Colin
"A little knowledge can be a dangerous thing".
Especially in my case!!
PepperPig
Registered Member
 
Posts: 38
Joined: Mon Aug 03, 2009 12:51 pm
Location: Scotland

Postby wheels » Fri Aug 21, 2009 6:43 pm

Ooh err, me and my big mouth! :lol:
User avatar
wheels
Global Moderator
 
Posts: 12894
Joined: Sat Sep 02, 2006 4:29 pm
Location: Leicestershire, UK

Postby saucisson » Fri Aug 21, 2009 7:49 pm

Yup :D

:wink:

Dave
Curing is not an exact science... So it's not a sin to bin.

Great hams, from little acorns grow...
User avatar
saucisson
Site Admin
 
Posts: 6851
Joined: Sat Mar 04, 2006 8:46 pm
Location: Oxford UK

Postby Oddley » Sun Aug 23, 2009 12:03 pm

Sorry guys I Posted an incomplete post. Pressed the wrong button (Submit instead of Preview). So if anybody read my post it had some inaccuracies in the calc's so please ignore.
Last edited by Oddley on Sun Aug 23, 2009 1:36 pm, edited 1 time in total.
Being right, only comes from being wrong.
User avatar
Oddley
Registered Member
 
Posts: 2250
Joined: Sun Oct 03, 2004 10:58 pm
Location: Lost Dazed and Confused

Postby Oddley » Sun Aug 23, 2009 1:33 pm

I think there is probably some concern about the 1/2 the equilibrium time, on the SUFFOLK TREACLE CURE. I calculate equilibrium, on 10 days per Kg. So how do I know it's 10 days per Kg, simple answer is, I don't!, It's an estimation, through experience. I could be 5 -10% off, or if you don't believe me, more! fortunately, even if the Suffolk treacle cure goes to equilibrium, the amounts of nitrates are not enough to cause any problems. Unless you use silly little pieces of meat. Like under 1 Kg.

There was some concern about the formula I was using, the FDA formula for equilibrium ie:


    Grams premixed cure # 1 × % Nitrite in mix × 1,000,000
    ----------------------------------------------------------------------- = ppm
    100 × (green weight (gram) meat block + gram pickle)

Which is a equilibrium calculation. I believe that the meat will cure by having a start and through dissipation and osmosis will slowly absorb the chemicals at approx 10 days per Kg until equilibrium.

It was questioned that, perhaps I should be using the FDA method one, recommended for hams bacon and such ie:


    Grams premixed cure × % Nitrite in mix × Pickup × 1000000
    ----------------------------------------------------------------------------- = ppm
    100 ×100 × Weight of Brine
The only trouble I have found with the above formula is, that unless you pump to a certain level, how do you know how much pickup there is on an immersion only cure? You cannot take an initial weight, and weigh the meat every so often, as there is no correlation between the exchange of chemicals, and the weight of the meat plus chemicals. Notice I say exchange of chemicals. Up to about 100g of salt per litre of water there will be a gain of weight in water after this, any more salt per litre, will result in an overall loss of water, thereby making the meat lighter.

So taking any concerns into account, I have calculated an equilibrium cure, using my two to one method, that I hope you will agree is safe. Although, if you don't believe my, 10 days a Kg to equilibrium, I don't know how you will know when this stage is reached. I leave that to you.


I wrote:Suffolk Treacle Ham 2-1 method To Equilibrium

IMPORTANT, ONLY USE THESE RATIOS
2 parts Meat
1 parts Brine

Percent of Brine Weight Only:
69.7684 % Water
7.7521 % Beer
7.98 % Salt (10.1% Brine Concentration)
9.9 % Treacle
3.5 % Soft Brown Sugar
0.765 % Cure #1 (5.88% NitrIte)
0.09 % NitrAte (Saltpetre - Potassium NitrAte)
0.2445 % Pepper
100 %

Ingoing Amounts:
2.9 % Salt
3.4 % Dry Sugar
150 mg/Kg Nitrite
300 mg/Kg NitrAte
0.0815 % Pepper

Method:
Make the brine, by heating the water and beer to boiling point, add all the ingredient's except the cure #1 and saltpetre. Boil until sugar, treacle and salt are dissolved. Cool the brine to room temperature, then add the cure # 1 and saltpetre, stir well, with a sterilised wooden or plastic spoon.

Cover the meat with the brine, cover container with a lid and leave in the bottom of the fridge, or other cold place 2 - 3 °C for 10 days per kilo of meat (not fat, skin or bone). Remove from brine and air dry, or leave in the bottom of the fridge to dry, and cook. You could of course smoke this product when a suitable pellicle forms.


I have included the worked example below using the 20lb ham in the original recipe. I hope this helps.

I wrote:Worked example.

Suffolk Treacle Ham 2-1 method To Equilibrium

2 parts Meat (5897 g Meat - Calculated without bone fat or skin)
2 parts (2948.5 g brine)

Percent of Brine Weight Only: (In this case 2948.5 g brine)
2057 g Water
229 g Beer
235 g Salt
292 g Treacle
103 g Soft Brown Sugar
22.56 g Cure #1
2.7 g Saltpetre
7 g Pepper

Total Weight Meat + Brine = 8845.5g

Method:
Make the brine, by heating the water and beer to boiling point, add all the ingredient's except the cure #1 and saltpetre. Boil until sugar, treacle and salt are dissolved. Cool the brine to room temperature, then add the cure # 1 and saltpetre, stir well, with a sterilised wooden or plastic spoon.

Cover the meat with the brine, cover container with a lid and leave in the bottom of the fridge, or other cold place 2 - 3 °C for 10 days per kilo of meat (not fat, skin or bone). Remove from brine and air dry, or leave in the bottom of the fridge to dry, and cook. You could of course smoke this product when a suitable pellicle forms.

    Last edited by Oddley on Sun Aug 23, 2009 3:31 pm, edited 2 times in total.
    Being right, only comes from being wrong.
    User avatar
    Oddley
    Registered Member
     
    Posts: 2250
    Joined: Sun Oct 03, 2004 10:58 pm
    Location: Lost Dazed and Confused

    Postby wheels » Sun Aug 23, 2009 2:08 pm

    I never cease to be amazed by your 2:1 method Oddley - such a brilliant solution to the perenial problem of immersion curing.

    I hate the 'two method' system for these cures as a what stage time-wise during the process a method 1 cure becomes a method 2 (even partially) is anyone's guess.

    Going 'all the way' to equilibrium at least removes this quandry.

    Phil
    User avatar
    wheels
    Global Moderator
     
    Posts: 12894
    Joined: Sat Sep 02, 2006 4:29 pm
    Location: Leicestershire, UK

    Postby captain wassname » Wed Aug 26, 2009 10:15 am

    I am V.busy at the moment but have been keeping half an eye on this thread.As mentioned prev.when I cured with tracle I used 20%At the time I did some reseach on treacle and came to the conclision that it probably contained as much as 30% water which would make a differenceto the brine concerntration calcs.I used no water only beer (IPA) but can see you may need less if you used something like stout or Newcastle Brown.
    Hope this is of some help.

    Jim
    captain wassname
    Registered Member
     
    Posts: 1529
    Joined: Mon Sep 22, 2008 4:32 pm
    Location: west cumbria

    PreviousNext

    Return to Beginners

    Who is online

    Users browsing this forum: No registered users and 4 guests