Brine cure

Recipes and techniques using brine.

Brine cure

Postby tomwal » Fri Nov 23, 2012 12:42 pm

Hi all, I have a 5kg pork loin I would usually dry cure, but have never used a brine to cure my pork, does anyone have a good brine recipe for a loin this size or can you point me in the right direction on the forum.

Thanks


Wal
tomwal
Registered Member
 
Posts: 188
Joined: Mon Feb 27, 2012 10:47 am
Location: Southport, England

Postby warston » Fri Nov 23, 2012 2:11 pm

Hey Wal and welcome to the forums !

here is something may could help as a first attempt of making wet cure ham:
http://forum.sausagemaking.org/viewtopic.php?t=4862
warston
Registered Member
 
Posts: 129
Joined: Sun Oct 14, 2012 1:47 pm
Location: CA, USA

Postby tomwal » Fri Nov 23, 2012 3:31 pm

Thanks warston.


Wal
tomwal
Registered Member
 
Posts: 188
Joined: Mon Feb 27, 2012 10:47 am
Location: Southport, England

Postby yotmon » Fri Nov 23, 2012 3:33 pm

Hi Tom, Im in the same boat as yourself. Fancied curing a piece of pork by the 'wet' method. I picked up a cheap piece of bonless leg from Asda which is half the size of your joint. It looked a nice piece in the pack but when I've opened it, it looks like 'Edward scissor hands' boned it out ! there are slashes everywhere, so I had to be careful to get the cure in all the knucks and crannies. I've been advised by 'them who know' to go for the pump and rub method which basically injects half the cure into the meat with a 10% brine calculated on the weight of your meat. The rest is rubbed in the same as a dry cure. I followed the instructions on 'Wheels' calculators on the site and was advised that it would be okay to omit the saltpeter.
I know this isn't what you've asked for, but is supposed to be a lot quicker and safer method of curing. Also have a look at the recent post by Capt. Wassaname posted a couple of days ago, were he has cured a ham by the injection method.
Hope this helps.

Ste.
"Success is going from failure to failure without a loss of enthusiasm." - Sir Winston Churchill
User avatar
yotmon
Registered Member
 
Posts: 637
Joined: Sat Mar 10, 2012 2:07 pm
Location: North west England

Postby captain wassname » Fri Nov 23, 2012 5:33 pm

I am doing a 3kg (2996 gm) leg of cheap pork tonight.
I will use an 8% injection rather than the 6% I have been using in responce from a comment from Salmo. Namely he wanted it "moist"
I will also be using for the first time Phosphate because Dan did an experiment and concluded that pork cured with phosphate lost less weight when cooked.
Im not in a position to recommend or otherwise the use of phosphate as yet
Here is the injection part of the cure.
23gms salt
3.5 gms cure #1
15 gms sugar
6gms phosphate
this totals 47.5 gms.
Since I want an 8% injection then I need 240(8% of 3kg)-47.5=192.5 gms water.
If you leave out the phophate you need another 6 gms water
For the rub I will use 22gms salt,4 gms cure#1 and 15 gms sugar
Wrap in clingfilm place in tupperware tray (in case of leaks) leave in the fridge for 12 day,turning every 2 days The great thing is that you cannot overcure using this method as long as you have 2.5 gms cure #1 for every kilo of meat.

Jim
Last edited by captain wassname on Sat Nov 24, 2012 9:34 am, edited 1 time in total.
now merely fat
captain wassname
Registered Member
 
Posts: 1529
Joined: Mon Sep 22, 2008 4:32 pm
Location: west cumbria

Postby tomwal » Fri Nov 23, 2012 5:54 pm

Thanks guys, I'm going to try a pump and rub, see how it goes, Ste, I bought a leg of pork from ASDA it was that badly butchered I ended up using it for pulled pork, tasty though...


Wal
tomwal
Registered Member
 
Posts: 188
Joined: Mon Feb 27, 2012 10:47 am
Location: Southport, England

Postby crustyo44 » Fri Nov 23, 2012 7:28 pm

Hi,
Being a bit of a health freak, personally I would leave out the Phosphate. We are eating already too much chemicals, cures are a different kettle of fish altogether and must be used for a long and healthy life.
I have used Wheels' cure recipe for quite some time and found it great.
Before you smoke any cured meat, just slice of a bit and fry it first as a test to see if you like the salt content, if too high to your liking, soak it for a few hours and try it again. Then smoke it.
I find that Pork neck fillet/scotch fillet are better to eat as a smoked meat due to it being juicier, better fat distribution in the meat.
Smoked loin I find dry-ish. Scotch fillet is cheaper than loin as well.
That's my opinion for what it's worth.
Good luck.
Jan.
crustyo44
Registered Member
 
Posts: 640
Joined: Thu Oct 07, 2010 12:00 am
Location: Brisbane.Australia

Postby captain wassname » Fri Nov 23, 2012 11:58 pm

Hi Jan phosphate not recommended but Ill try most things once.

Jim
now merely fat
captain wassname
Registered Member
 
Posts: 1529
Joined: Mon Sep 22, 2008 4:32 pm
Location: west cumbria

Postby DanMcG » Sat Nov 24, 2012 4:43 am

Looking forward to your results.
Last edited by DanMcG on Sat Nov 24, 2012 5:24 am, edited 1 time in total.
User avatar
DanMcG
Registered Member
 
Posts: 1461
Joined: Mon Dec 15, 2008 11:09 pm
Location: Central NY, USA

Postby crustyo44 » Sat Nov 24, 2012 4:47 am

Hi Jim,
I fully agree with you, no doubt I will try phosphate as an ingredient one day, if we use it every day, that is, if you eat hamburgers every day, you might have a health problem.
Regatrds,
Jan.
crustyo44
Registered Member
 
Posts: 640
Joined: Thu Oct 07, 2010 12:00 am
Location: Brisbane.Australia

Postby Salmo » Sat Nov 24, 2012 10:28 pm

Jim
Is the Phosphate in your recipe the product sold on this site as Supaphos?
Cheers
Give a man a fish,and you feed him for a day.
Teach a man to fish,and you won't see him again for the rest of the season.
User avatar
Salmo
Registered Member
 
Posts: 101
Joined: Wed Aug 03, 2011 2:14 pm
Location: LONDON

Postby captain wassname » Sun Nov 25, 2012 3:58 pm

Yes I had a lot of bother dissolving it.
Next time Ill mix it in the water before it cools down.

Jim
now merely fat
captain wassname
Registered Member
 
Posts: 1529
Joined: Mon Sep 22, 2008 4:32 pm
Location: west cumbria

Postby Salmo » Sun Nov 25, 2012 4:41 pm

Thanks Jim
Look forward to hearing about the result.

Mel
Give a man a fish,and you feed him for a day.
Teach a man to fish,and you won't see him again for the rest of the season.
User avatar
Salmo
Registered Member
 
Posts: 101
Joined: Wed Aug 03, 2011 2:14 pm
Location: LONDON

Postby captain wassname » Thu Dec 06, 2012 8:49 pm

Progress report
Pork weighed 2800 to start
injected 240 gms brine,
uncovered it and rinsed weighed 2947.It had leaked a fair bit

Think Ill go back to 6% inject where possible.

Ill leave it overnight take a slice off for a gammon sarnie then cook the bugger.
Will post back on the morrow re pre and post cooked weights.

Jim
now merely fat
captain wassname
Registered Member
 
Posts: 1529
Joined: Mon Sep 22, 2008 4:32 pm
Location: west cumbria

Postby captain wassname » Mon Dec 10, 2012 12:07 am

simmered it until internal temp was 69 deg,
finished weight1968 gms.

Bloody cheap supermaket meat.

Jim
now merely fat
captain wassname
Registered Member
 
Posts: 1529
Joined: Mon Sep 22, 2008 4:32 pm
Location: west cumbria

Next

Return to Brine cured meats

Who is online

Users browsing this forum: No registered users and 14 guests