I am looking for a good pepperoni recipe.
Jim
harleykids wrote:I also dry in my chamber at the cool end of the spectrum, around 50 deg F instead of 52 deg F.
But I run a higher end humidity around 75% so as not to get any rim hardening.
But I think I will try lowering my humidity to around 70% and dropping my temp to 48 deg F and see if that slows down the mold growth. Wiping with vinegar definitely helps inhibit mold growth, as does soaking casings in potassium sorbate solution instead of plain water.
Thx!
Users browsing this forum: No registered users and 22 guests