by RodinBangkok » Fri Jun 21, 2013 11:15 pm
This style stuffer, and many others for that matter are very poorly designed for efficient flow. You have a very large barrel with a flat end plate and a hole, the material is pushed with another flat plate against this large flat surface, and some of the material finds its way out the small hole. The larger the diameter barrel, and the smaller the diameter hole the more force is needed to get material to flow. Add to that very stiff mixtures and all that is happening is you are compressing this mixture against two large plates, hoping some of it will find its way out the small opening. Just plain poor design, but cheap to make.
I am the master of my fate:
I am the captain of my soul.
_____
Rod