OK to use same "cave" for both meat and cheese drying?

Recipes and techniques for hard cheese.

OK to use same "cave" for both meat and cheese drying?

Postby SausageParty » Fri Oct 18, 2013 11:39 pm

I'm making a temperature and humidity controlled "cave" out of an old fridge/freezer. It seems like both things want about 55F and 70% RH. Is there any reason I couldn't use the same cave for drying both charcuterie and cheese?

Thanks.
SausageParty
Registered Member
 
Posts: 6
Joined: Sat Oct 05, 2013 12:16 pm

Re: OK to use same "cave" for both meat and cheese drying?

Postby Wunderdave » Mon Oct 21, 2013 4:27 pm

you could in theory but bear in mind that you'll probably need differing conditions over the course of drying either your meats or cheese.

I.E. for meats at the beginning stages you want higher RH to prevent case hardening, and lower RH as drying progresses to finish. These numbers are probably still within tolerances for either range of processes.

another thing to consider is that by drying both you will likely have some cross contamination of mold. Cheeses and meats use different strains of mold which will affect the flavors of either.

But, it should work.
Wunderdave
Registered Member
 
Posts: 491
Joined: Sat Jul 02, 2011 9:12 pm
Location: Golden, Colorado


Return to Hard Cheese Making

Who is online

Users browsing this forum: No registered users and 3 guests