Franco's 7 day Lancashire Cheese

Recipes and techniques for hard cheese.

Franco's 7 day Lancashire Cheese

Postby Franco » Sun Apr 23, 2006 5:59 pm

I've only been making cheese for around 4 weeks but have really caught the bug...

This is a recipe I have adapted from one of Riks and in theory it shouldn't work so well but I must have got lucky as this is one of the best Lancashire cheeses I have ever tasted :lol:

Ingredients:

1 gallon of full milk
Half tub buttermilk
Half tub plain yoghurt ( I used Danone)
half ounce salt
80 drops Vegeren

Follow the method for Rik's King blue Stilton but don't add any blue cheese.

When you get to the pressing section leave the cheese under pressure for twice as long and with a heavier weight than suggested.


The cheese is ready for eating immediately after pressing

As my recipe doesn't use as much salt this cheese should be eaten within a week of pressing.


Image
Good luck

Franco
User avatar
Franco
Site Admin
 
Posts: 627
Joined: Fri Jul 16, 2004 4:12 pm
Location: Bolton, England

Postby Rik vonTrense » Sun Apr 23, 2006 8:25 pm

Keeping it to mature will improve the flavour.....but there is nothing better
than a fresh young cheese...............Hmmmmm

But that is very good...
Rik vonTrense
User avatar
Rik vonTrense
Registered Member
 
Posts: 558
Joined: Sat Feb 18, 2006 6:18 pm
Location: GOFFS OAK..SE HERTS

Postby Wohoki » Wed Apr 26, 2006 3:12 pm

Looks great. Would it form a crust if kept for a while longer?
Wohoki
Registered Member
 
Posts: 712
Joined: Thu Jan 05, 2006 12:42 pm
Location: Hampshire

Postby Rik vonTrense » Wed Apr 26, 2006 3:41 pm

Yes of course it would. it will harden on the outside naturally but you have to watch out for pathogens and wipe it with a vinegar rag if any occur.

The job of an affineur is to ripen the cheese and some wash the cheese in wine everyday to get a good rind others with spices etc etc.


.
Rik vonTrense
User avatar
Rik vonTrense
Registered Member
 
Posts: 558
Joined: Sat Feb 18, 2006 6:18 pm
Location: GOFFS OAK..SE HERTS

Postby Rik vonTrense » Thu Apr 27, 2006 6:23 pm

This is a photo of a true Lancashire cheese with a strong flavour and a six
month maturing time.

Image

mind you a cheese can be eaten very fresh but the flavour is not so
pronounced.....a lot of commercial mild cheddars are out of the mould and in
the shop inside a week with the use of an accelerator called acelerase.
Rik vonTrense
User avatar
Rik vonTrense
Registered Member
 
Posts: 558
Joined: Sat Feb 18, 2006 6:18 pm
Location: GOFFS OAK..SE HERTS

Postby jenny_haddow » Thu May 04, 2006 6:16 am

Hi Franco,

I'm going to make up your Lancashire recipe today, it looks delicious, and Rik, I'll take some pictures and attempt to post them, but don't hold your breath!

Jen
User avatar
jenny_haddow
Registered Member
 
Posts: 1331
Joined: Thu Mar 30, 2006 7:54 am
Location: Cambridgeshire and France

Postby Rik vonTrense » Thu May 04, 2006 7:30 am

Here is my little hard cheese truckle.

I is surprising what a day gives on the blue formation. I am tempted to open it to see what it is like.

But I think I will see how it develops after a few weeks.

Image


.
Rik vonTrense
User avatar
Rik vonTrense
Registered Member
 
Posts: 558
Joined: Sat Feb 18, 2006 6:18 pm
Location: GOFFS OAK..SE HERTS

Postby jenny_haddow » Thu May 04, 2006 7:47 am

That looks beautiful. Its overall much bluer than mine, but I haven't used the P. Roqueforti yet which I presume produces a better and faster blueing.
I've taken delivery of a hard cheese mould, a camembert mould, P.Roq and P.Candidum and cheese mats (what a difference they make!). A cheese press is on its way, just had to have one, also I'd like to get to grips with some harder cheeses which needs more weight than couple of tins of cat food.

Cheers Jen
User avatar
jenny_haddow
Registered Member
 
Posts: 1331
Joined: Thu Mar 30, 2006 7:54 am
Location: Cambridgeshire and France

Postby Rik vonTrense » Thu May 04, 2006 8:03 am

I will post a cheddar for you and you can learn what cheddaring means.

You can sustain the weight on your cheese with a press with my home made press I could give a sustained pressure of 200lbs over a couple of weeks and make a very fine closed cheese.

These are my cheese so far in production the eldest is two weeks old,




Image
Rik vonTrense
User avatar
Rik vonTrense
Registered Member
 
Posts: 558
Joined: Sat Feb 18, 2006 6:18 pm
Location: GOFFS OAK..SE HERTS

Postby jenny_haddow » Fri May 05, 2006 1:15 pm

I've just set off Franco's recipe with the addition of some cream and a smidgeon of calcium chloride. As you can tell I've gone into experimental mode. I'll use the cheese press (for the first time) and my new hard cheese mould, it's all too exciting!

Cheers

Jen
User avatar
jenny_haddow
Registered Member
 
Posts: 1331
Joined: Thu Mar 30, 2006 7:54 am
Location: Cambridgeshire and France

Postby jenny_haddow » Sat May 06, 2006 6:32 am

What a difference a cheese press makes! I'm hoping I've done this right, but I lined my mould with cloth before I put the curds in. I thought the curds might squidge out of the holes in the mould when under pressure if I didn't. It also gives me something to grip when I turn the cheese. Adding a little calcium chloride certainly improved the curds, and as there were more curds than I had mould space I stacked the camembert mould on top to take the excess. By this morning they had compressed to the top of the first mould so I could take the camembert mould away. Pictures to follow some time this weekend I hope.

Cheers

Jen
User avatar
jenny_haddow
Registered Member
 
Posts: 1331
Joined: Thu Mar 30, 2006 7:54 am
Location: Cambridgeshire and France

Postby aris » Sat May 06, 2006 6:52 am

Rik vonTrense wrote:.a lot of commercial mild cheddars are out of the mould and in
the shop inside a week with the use of an accelerator called acelerase.


My local Tesco does a 3 year matured Canadian Vintage cheddar - it is divine!
aris
Site Admin
 
Posts: 1875
Joined: Fri Jul 16, 2004 12:36 pm
Location: UK

Postby Rik vonTrense » Sat May 06, 2006 9:22 am

Canadian cheddar has a very good name and their vintage cheddar is excellent.

You can get English vintage cheddar but of course it's all a matter of money
and the longer you keep the cheese in the maturing cave the longer it is not earning money.....so this accounts for it's higher price.


.
Rik vonTrense
User avatar
Rik vonTrense
Registered Member
 
Posts: 558
Joined: Sat Feb 18, 2006 6:18 pm
Location: GOFFS OAK..SE HERTS

Postby Rik vonTrense » Tue May 09, 2006 7:02 am

Jen .....I have a small set of bathroom scales and with my dumbell weights of 4x2kg and 4x1kg in various combinations I hang them on my weight arm and make a chart of the pressure pressing on the scales by the ram pushing down and mark the arm off accordingly.

As I have a rather long weight arm almost 4 feet long ...I can get up to a pressure of 200lbs.

Mind you there is a formula for the pounds per square inch over a given area and this varies through the cheese and this is why we turn the cheese to even out the pressure.

In the end it's all guess work but at least it is constant and repeatable.

But your Lancashire looks very good. Did you salt it or brine bath it only with a brine bath it tends to make a good air dried rind.


.
Rik vonTrense
User avatar
Rik vonTrense
Registered Member
 
Posts: 558
Joined: Sat Feb 18, 2006 6:18 pm
Location: GOFFS OAK..SE HERTS

Postby jenny_haddow » Tue May 09, 2006 7:15 am

Hi Rik,

I don't think this little press would accomodate a set of scales, but my OH is a mathematician so he could probably work out the weight for me (in his head, in a trice). However, the press has produced a lovely firm cheese and I'm looking forward to trying it. I can see I'll have to make up a bigger version of this press in the future.

Cheers

Jen

Any chance of camembert and brie recipes, I've got the moulds ready and waiting.

Can you run me through salting and brine bathing please? It has salt in it as per Franco's recipe.
User avatar
jenny_haddow
Registered Member
 
Posts: 1331
Joined: Thu Mar 30, 2006 7:54 am
Location: Cambridgeshire and France

Next

Return to Hard Cheese Making

Who is online

Users browsing this forum: No registered users and 1 guest

cron