Berkel GF40 Slicer anyone?

Where to buy, how to use. Stuffers, casings, spices, grinders, etc.

Berkel GF40 Slicer anyone?

Postby Gingerpig » Sat Sep 07, 2013 3:21 pm

Anyone have the above or an old manual laying around?
Just bought a second hand machine and want to remove the blade to give it all a good clean, we had one in the shop in the 80's but I cant remember how to remove the blade, guess its clockwise for the brass screw and clockwise again for the bush as the blade runs counter clock but didn't want to risk it.
any help would be appreciated.
Regards
Gingerpig
Newly Registered
 
Posts: 2
Joined: Sat Sep 07, 2013 3:13 pm

Re: Berkel GF40 Slicer anyone?

Postby TJ Buffalo » Thu Sep 12, 2013 1:09 am

Have you contacted these folks?
http://berkelsalesservice.com/berkel_parts.htm
TJ Buffalo
Global Moderator
 
Posts: 719
Joined: Sun Jul 10, 2005 2:07 am
Location: New Jersey, USA

Re: Berkel GF40 Slicer anyone?

Postby Gingerpig » Mon Sep 16, 2013 4:10 pm

Hi TJ, I did and they came back this morning with an old manual.
Stripped the machine, replaced a switch fit new sharpening stones all back together and as good as new.
many thanks
T
ps. its counter clockwise to unscrew if it helps anyone else
Gingerpig
Newly Registered
 
Posts: 2
Joined: Sat Sep 07, 2013 3:13 pm


Return to Equipment & Supplies

Who is online

Users browsing this forum: No registered users and 2 guests

cron