Page 1 of 1

Stuffer tubes

PostPosted: Fri Oct 25, 2013 3:23 pm
by onewheeler
Can anyone suggest a source of stainless stuffer tubes that would fit my stuffer? The plastic tubes have a diameter at the end secured by the ring of 57 mm. I'm specifically looking for a small diameter tube for sheep casings, which I find don't slide off the plastic easily enough.

Martin/

Re: Stuffer tubes

PostPosted: Sat Oct 26, 2013 1:54 am
by Thewitt
Stuffing with a grinder or a piston stuffer?

Re: Stuffer tubes

PostPosted: Sat Oct 26, 2013 10:55 am
by onewheeler
A proper piston jobbie

Re: Stuffer tubes

PostPosted: Sat Oct 26, 2013 2:06 pm
by Thewitt

Re: Stuffer tubes

PostPosted: Sat Oct 26, 2013 3:16 pm
by onewheeler
Ta! Looks like the right size. A UK supplier would be good, the tubes would cost almost as much from the USA as the stuffer did :(

Martin/

Re: Stuffer tubes

PostPosted: Sat Oct 26, 2013 3:24 pm
by wheels
Martin,

I'd check, I think that a #5 is 53-54mm.

Phil

Re: Stuffer tubes

PostPosted: Sat Oct 26, 2013 6:01 pm
by DanMcG
And an #8 is 2.375 or 60mm