Page 1 of 1

Stainless steel stuffing tubes

PostPosted: Tue Aug 29, 2017 11:28 am
by petit couchon
Hi all,
Could anyone tell me if the SS tubes from weschenfelder (link below) fit the hobby stuffer from the site shop.

http://www.weschenfelder.co.uk/butchers ... zzles.html

Thanks in advance.

Re: Stainless steel stuffing tubes

PostPosted: Tue Sep 12, 2017 4:48 pm
by petit couchon
Just answered my own question, I received the SS tubes in the post today and there exactly the same size as the plastic ones so if anyone is interested you can buy these with confidence for your hobby stuffer, nice quality as well, that's me stuffing this weekend.

Re: Stainless steel stuffing tubes

PostPosted: Tue Sep 12, 2017 4:53 pm
by wheels
Thanks for posting this. I've no doubt that it will help other people.

Phil

Re: Stainless steel stuffing tubes

PostPosted: Mon Oct 16, 2017 12:56 pm
by TonyE
Hi

I have been trying to source some stainless steel stuffing tubes for my hobby stuffer, I looked on the Weschenfelder site and enquired what the diameter of the flange was?? i.e. the wide bit at the end where it connects to the stuffer. Rob at Weschenfelder was very helpful and informed me that the flange was 50+ mm(cannot remember the exact size) Unfortunately my hobby stuffer requires a flange diameter of 38-40mm.
Petit - if you read this message, would you mind telling me what size of flange is on the S.S. tubes you bought, if they are 40mm I would like to buy some as well.

Thanks - T

Re: Stainless steel stuffing tubes

PostPosted: Wed Oct 18, 2017 8:14 am
by DanMcG
38-40 mm is a common size for tubes in the States, for the small five pound stuffers.
https://www.sausagemaker.com/Set-of-3-S ... 8-1114.htm

I'm sure some supplier would ship overseas but it might be expensive

Re: Stainless steel stuffing tubes

PostPosted: Wed Oct 18, 2017 8:40 am
by TonyE
You are right there Dan

I found what I needed on their Web site but shipping from the U.S. it doubles the cost of the item, shame really because they have a fantastic selection over there, much more so than in the U.K.

Re: Stainless steel stuffing tubes

PostPosted: Thu Nov 09, 2017 7:06 am
by petit couchon
TonyE wrote:Hi

I have been trying to source some stainless steel stuffing tubes for my hobby stuffer, I looked on the Weschenfelder site and enquired what the diameter of the flange was?? i.e. the wide bit at the end where it connects to the stuffer. Rob at Weschenfelder was very helpful and informed me that the flange was 50+ mm(cannot remember the exact size) Unfortunately my hobby stuffer requires a flange diameter of 38-40mm.
Petit - if you read this message, would you mind telling me what size of flange is on the S.S. tubes you bought, if they are 40mm I would like to buy some as well.

Thanks - T

Sorry for the late reply, the flange is 53mm.
Hope this helps.