Can anyone advise about what mincer sizes mean? e.g. Franco does size 12 or 22.
I am after a coarse plate for my Moulinex HV8 which has plate diameter of 54.2mm (2.13") (with two lugs at 57.8 mm (2.275") diameter by 15.1 mm (0.6") wide ) with a 3.5 mm (0.14") thickness. Is this a standard size and can I use one of Franco's plates?
Mincer Sizes
3 posts
• Page 1 of 1
Mincer Sizes
by markh » Sun Aug 28, 2005 9:56 pm
Before the Roman came to Rye or out to Severn strode, the rolling English Drunkard made the rolling English road... G.K.Chesterton
- markh
- Registered Member
- Posts: 67
- Joined: Sat Aug 06, 2005 7:52 pm
- Location: Rossendale, Lancs
by Paul Kribs » Mon Aug 29, 2005 6:28 am
markh
Drop an email to Paul Johnson at Cartel explaining what you have just written and what you are looking for. They specialise in mincer plates/blades and are based in Slough near London.
paul@cartel-ltd.co.uk
Regards, Paul Kribs
Drop an email to Paul Johnson at Cartel explaining what you have just written and what you are looking for. They specialise in mincer plates/blades and are based in Slough near London.
paul@cartel-ltd.co.uk
Regards, Paul Kribs
-
Paul Kribs - Registered Member
- Posts: 1588
- Joined: Tue Apr 12, 2005 11:41 am
- Location: South London, England
by markh » Mon Aug 29, 2005 1:42 pm
Thanks Paul.
I notice they have a web-site with some good 'Care and Maintenance' Tips as well.
I notice they have a web-site with some good 'Care and Maintenance' Tips as well.
Before the Roman came to Rye or out to Severn strode, the rolling English Drunkard made the rolling English road... G.K.Chesterton
- markh
- Registered Member
- Posts: 67
- Joined: Sat Aug 06, 2005 7:52 pm
- Location: Rossendale, Lancs
3 posts
• Page 1 of 1
Return to Equipment & Supplies
Who is online
Users browsing this forum: No registered users and 8 guests