Best injector recommendation please.

Best injector recommendation please.

Postby GUS » Sat Dec 13, 2014 12:53 pm

Some 5yrs ago I purchased (whilst in Canada) a brine injector that looked like it would do the job, one use later & washing it, the acrylic snapped, (still have the needle part stored away) ...so best priced quality injector on the market advice please, it is really hindering me.
Mac's ProQ CSG devotee.
Founder member of "Cheese club" ...it's like "Fight Club" only cheesier

Avatar courtesy of Thad Cox https://twitter.com/LimitedFun http://limitedfun.tumblr.com/
User avatar
GUS
Registered Member
 
Posts: 600
Joined: Sun May 26, 2013 1:05 pm
Location: Cambridgeshire U.K.

Re: Best injector recommendation please.

Postby wheels » Sat Dec 13, 2014 3:28 pm

How I wish someone in the UK would stock these:

http://www.butcher-packer.com/index.php ... ucts_id=25

I have one of these:

http://www.amazon.co.uk/gp/product/B001 ... 1317316462

It's the best I've found, so far, in the UK, but is still not the best.

Phil
User avatar
wheels
Global Moderator
 
Posts: 12176
Joined: Sat Sep 02, 2006 4:29 pm
Location: Leicestershire, UK

Re: Best injector recommendation please.

Postby ped » Sat Dec 13, 2014 4:17 pm

I have the same as you Phil, quite adequate. I bought one of these though: http://www.pfmplus.co.uk/shop/other-ite ... mp-f-dick/. In an auction, just in case, you understand :)
ped
Registered Member
 
Posts: 386
Joined: Fri May 08, 2009 11:03 am
Location: Kent

Re: Best injector recommendation please.

Postby wheels » Sat Dec 13, 2014 10:19 pm

Doh! Now I'm jealous! :lol: :lol:
User avatar
wheels
Global Moderator
 
Posts: 12176
Joined: Sat Sep 02, 2006 4:29 pm
Location: Leicestershire, UK

Re: Best injector recommendation please.

Postby crustyo44 » Sun Dec 14, 2014 6:30 am

Beware of injectors with really fine thread on the tube, it damages easily due to it being manufactured now in China. USA made injectors, if they are still available, are still the best and long lasting.
Personally I have a large Spitjack Magnum and a bunch of cheap plastic injectors. The Spitjack will outlast my grandkids and the plastic injectors can be tossed every couple of years without breaking the bank.
My two bobs worth!!
Merry Christmas to All Members.
Jan.
Brisbane.
Australia.
crustyo44
Registered Member
 
Posts: 631
Joined: Thu Oct 07, 2010 12:00 am
Location: Brisbane.Australia

Re: Best injector recommendation please.

Postby RodinBangkok » Sun Dec 14, 2014 10:36 am

You can make a large capacity tank type using a soda syrup tank, a needle manifold and you'll need an air compressor to charge the syrup tank.
Here's a link to one they sell:
http://www.mpbs.com/catalog/product/bp-500-brine-pump
I've used the stainless needle type for years, not sure where I got it, but the link for butcher packer shows that one, the Dick will be a good unit, but all Dick stuff is pretty pricy, I built a tank injector for less than the Dick unit costs.
I am the master of my fate:
I am the captain of my soul.
_____

Rod
RodinBangkok
Registered Member
 
Posts: 334
Joined: Wed Aug 13, 2008 7:55 am
Location: Bangkok, Thailand

Re: Best injector recommendation please.

Postby homer » Tue Nov 17, 2015 9:43 pm

went through 3 of the masterclass type ones, always split in the end, so got some which looked just the same off fleabay from china at a fraction of the cost thinking just replace them when they split or crack :D only to find the lookelikey ones were just that and didn't even seal around the o ring plunger as the main tubes were distorted so they went in the bin :roll:
then came across this one.http://www.amazon.co.uk/Mr-Grill-Stainless-Marinade-Injector/dp/B00EF45AHU
all stainless no weak bits and still going strong, different build quality to the others i have had
wish i had bought this one first :shock:
Other half moaned on about me finding new hobbies ..found this site..now she's sorry!!
User avatar
homer
Registered Member
 
Posts: 126
Joined: Fri Apr 15, 2011 5:00 pm
Location: London


Return to Smoking and Barbecuing

Who is online

Users browsing this forum: No registered users and 2 guests