Saw dust won't stay alight

Saw dust won't stay alight

Postby frog » Sun Feb 05, 2012 12:39 pm

Can anyone give me some advice please.
I've just started cold smoking using a Pro Q cold smoke generator.
I'm using a Nordic Kettle smoker as a chamber for the time being.
I had 4 8oz lumps of cheddar in there and 4 garlic bulbs.
My problem is that the sawdust (as supplied) won't stay alight. Now granted it was outside and the ambient temp was around zero.
It was OK for an hour or so then I had to relight it.
Any ideas?
User avatar
frog
Registered Member
 
Posts: 11
Joined: Sun Feb 05, 2012 12:25 pm
Location: Cardiff

Postby tommix » Sun Feb 05, 2012 2:39 pm

Check out this link, it should help.

http://forum.sausagemaking.org/viewtopi ... hlight=pro

Tim
tommix
Registered Member
 
Posts: 236
Joined: Sun Jul 17, 2011 2:05 pm
Location: Central California

Postby frog » Sun Feb 05, 2012 3:56 pm

Thanks Tim, at least I am not alone. I'll have a read through this and persevere
Frog
User avatar
frog
Registered Member
 
Posts: 11
Joined: Sun Feb 05, 2012 12:25 pm
Location: Cardiff

Postby DanMcG » Sun Feb 05, 2012 10:46 pm

Microwaving the dust for a couple minutes to remove the moisture helps to keep them going, and also the smoker will need a fair supply of air to keep it burning.
User avatar
DanMcG
Registered Member
 
Posts: 1461
Joined: Mon Dec 15, 2008 11:09 pm
Location: Central NY, USA

Postby frog » Mon Feb 06, 2012 5:12 am

Thanks Dan,
I tried the microwave trick with what hadn't burnt, there was some steam. I'll open the vents wider next time. Cheers
Frog
User avatar
frog
Registered Member
 
Posts: 11
Joined: Sun Feb 05, 2012 12:25 pm
Location: Cardiff

Postby Ruralidle » Mon Feb 06, 2012 2:22 pm

Depending upon which species of wood you are using the "grain" size varies so you may need to press it down a little in the CSG whereas with others a more open approach works better - but you don't need much air. No more in than out and the CSG only generates a trickle of smoke so you don't want much coming out. Just enough to prevent the accumulation of stale smoke.

I dry the dust out in the plate warming oven of my Aga for as many hours as I can (I usually smoke stuff overnight except in the type of weather we have now so I put it in mid-morning and remove it around 6pm).
Ruralidle
Registered Member
 
Posts: 289
Joined: Tue Oct 27, 2009 10:37 pm
Location: Shropshire, UK

Postby frog » Tue Feb 07, 2012 6:00 am

Thanks Ruralidle,
I've got the dust spread out in the airing cupboard so that should dry it out nicely. I'm not sure about the species as I have tried dust from a couple of suppliers so it's a bit mongrelified now. Trial and error I guess. Smoked Salmon goes in this afternoon. At least the ambient temp is up a bit from Sunday. That may not make a scrap of difference but at least I won't freeze every time I pop outside to see if the bugger has gone out! Thanks for the help.
User avatar
frog
Registered Member
 
Posts: 11
Joined: Sun Feb 05, 2012 12:25 pm
Location: Cardiff

Postby Ruralidle » Tue Feb 07, 2012 9:36 am

Sorry if I caused any confusion mentioning species - what I meant was is the dust oak, cherry, apple or what? Certainly problems have sometimes stemmed from not using dust from Probbq because of size but that can be resolved with a coffee grinder and some trial and error :D . Having said that, I can't get the cherry wood dust from Probbq to stay alight :(
Ruralidle
Registered Member
 
Posts: 289
Joined: Tue Oct 27, 2009 10:37 pm
Location: Shropshire, UK

Postby frog » Tue Feb 07, 2012 3:33 pm

Hi Ruralidle,
No confusion over the species thing, I bought some dust on you know who bay and I've mixed some of each in an attempt to get it to stay alight. Apart from the stuff which came with the csg I'm using fine sawdust from whiskey barrels, oak I think.
I've now made it finer with the coffee grinder (should have cleaned the spices out first, curried smoke!!!!!!)
Still have to relight every hour or so. Hey ho at least it's not snowing.
User avatar
frog
Registered Member
 
Posts: 11
Joined: Sun Feb 05, 2012 12:25 pm
Location: Cardiff

Postby Ruralidle » Tue Feb 07, 2012 5:36 pm

Good luck with it. I have stuck with the Probbq dust and - with the notable exception of the cherrywood - the others do quite well (oak and apple being the best in my experience). I think that buying cheaper dust can be a false economy but once you get it going the results are really delicious. I can thoroughly recommend the "Suffolk" black ham recipe posted by BriCan http://forum.sausagemaking.org/viewtopi ... highlight=
Ruralidle
Registered Member
 
Posts: 289
Joined: Tue Oct 27, 2009 10:37 pm
Location: Shropshire, UK

Postby frog » Wed Feb 08, 2012 1:17 pm

I spoke to Ian from Macsbbq last night. He reckons it could have been down to a shortage of O2. Note the use of the past tense because based on his advice I went to Bee and Coo and bought a 94L plastic container and lid and this seems to have done the trick.

Thanks to every one for their time and advice. In particular Ian from Macsbbq for some really good customer service.
User avatar
frog
Registered Member
 
Posts: 11
Joined: Sun Feb 05, 2012 12:25 pm
Location: Cardiff

Postby saucisson » Wed Feb 08, 2012 4:32 pm

Good News :)
Curing is not an exact science... So it's not a sin to bin.

Great hams, from little acorns grow...
User avatar
saucisson
Site Admin
 
Posts: 6851
Joined: Sat Mar 04, 2006 8:46 pm
Location: Oxford UK

Postby SumpRat » Sat Oct 13, 2012 7:52 am

Hello Frog.

Airing cupboad? :o I hope Mrs Frog doesn't mind.

I had this problem with the CSG as well. I read in Dick Strawbridge's smoking book that a small computer fan in the bottom of the smoker helps. It sure does. Always get a consistent burn, but it is a bit quicker. Probably knocks of a couple of hours of the burn time. The quicker combustion does appear to make more smoke though.

When I asked Ian he did say that the sawdust needs to be fairly compact.

Now getting great consistent results.

SumpRat
User avatar
SumpRat
Registered Member
 
Posts: 20
Joined: Fri Oct 12, 2012 6:23 pm
Location: United Kingdom

Postby frog » Sat Oct 13, 2012 10:49 am

Hi Sum prat,

Thanks for the suggestion.
However using the airing cupboard to smoke anything is gonna fail on 2 counts.
1. It will stink the house out and in all probability set off every smoke detector in the street.
2. It's far too warm in there to cold smoke anything safely.

I'm getting a good 10 to 12 hour burn in my home made smoker now but thanks again for the suggestion.
User avatar
frog
Registered Member
 
Posts: 11
Joined: Sun Feb 05, 2012 12:25 pm
Location: Cardiff

Postby SteveW » Sat Oct 13, 2012 4:10 pm

I keep my smoking dust in the airing cupboard... I guess that's what sump rat is refering too as well. Now I've done this I've not had any problems keeping my CSG alight. To light mine I use a small butane soldering lighter from ebay rather than a candle and it's away and burning in 10 seconds. I don't clean mine out as often as I should but it keeps burning and I get 14hrs on a single run. If I want a heavier smoke I just light it in the middle and reduce the burn time by half but double the smoke. Great little gadjet.
SteveW
Registered Member
 
Posts: 127
Joined: Fri Sep 28, 2012 9:56 pm
Location: Cambridgeshire

Next

Return to Smoking and Barbecuing

Who is online

Users browsing this forum: No registered users and 28 guests