Meat saw blades help

Where to buy, how to use. Stuffers, casings, spices, grinders, etc.

Meat saw blades help

Postby Ian Wright » Fri Feb 27, 2015 10:14 pm

I have been trying to find a new blade for my saw.
The saw is a Weston brand 16in stainless i can get blades but all are just over 16in and don't fit my Weston saw.
I have searched all over the u.k. Websites no luck .
Ian Wright
Registered Member
 
Posts: 48
Joined: Sat Aug 06, 2005 1:25 pm

Re: Meat saw blades help

Postby yotmon » Sat Feb 28, 2015 11:40 pm

Can an over size blade be cut down to fit - they normally only have a pin or hole holding them to the frame, just a thought......
"Success is going from failure to failure without a loss of enthusiasm." - Sir Winston Churchill
User avatar
yotmon
Registered Member
 
Posts: 637
Joined: Sat Mar 10, 2012 2:07 pm
Location: North west England

Re: Meat saw blades help

Postby tommix » Sun Mar 01, 2015 3:41 pm

I have ordered blades from here before but that is in the U.S.
http://www.ferrariandsons.com/index.php ... ade-1.html
tommix
Registered Member
 
Posts: 236
Joined: Sun Jul 17, 2011 2:05 pm
Location: Central California

Re: Meat saw blades help

Postby Ian Wright » Sun Mar 01, 2015 5:16 pm

Thanks for that gents .just have to keep asking and hopping. :cry:
Ian Wright
Registered Member
 
Posts: 48
Joined: Sat Aug 06, 2005 1:25 pm

Re: Meat saw blades help

Postby ped » Mon Mar 02, 2015 8:12 am

Maybe try these : http://www.westonsupply.com/Butcher-Saws-s/105.htm

Doesn't look like they send internationally but maybe they might consider if you talk nicely to them??, then again it might be that with the P&P it would be cheaper to buy a new saw from UK supplier

If you want a small saw put "larder saw" into the search and you will get a number of sites which relate to Deer prep.
ped
Registered Member
 
Posts: 395
Joined: Fri May 08, 2009 11:03 am
Location: Kent

Re: Meat saw blades help

Postby kimgary » Wed Mar 04, 2015 6:30 pm

I know someone who fitted a butchers saw blade to a hacksaw frame as butchers saws are relatively expensive, he cuts the blade to size with a grinder, re drills holes for the pins at the correct distance.

Works really well.
My biggest fear in life is that when I die my wife sells all my stuff for what I told her I paid for it!!
kimgary
Registered Member
 
Posts: 364
Joined: Sun May 09, 2010 2:59 pm
Location: east sussex


Return to Equipment & Supplies

Who is online

Users browsing this forum: No registered users and 9 guests