The new experimental cold smoking thread

the competition...

Postby saucisson » Wed Aug 02, 2006 8:25 pm

I've been running three variants at once with virtually no heat generation tonight. I'm also applying Occam's razor to see how simple I can get it.

If the Bradley costs less than a �1 an hour in bisquettes to run, I'm looking at <15p an hour at the moment, with no investment in machinery...

I'm going to be eating humble pie for the rest of my life if this doesn't get off the ground :oops:

Who wants to sign up for a free test run? :D

"Legal bit: :wink:

Your only commitment is your address so I know where to send it.
I promise not to disclose it to any other party, and I'm happy to post to Occupier, Forum name or whatever." End of legal bit.

As this is a test run please be aware it is a pine/spruce mix and you might not want to smoke any food with it. I'm after a feel for how it works in some different BBQs/ smokers. If you are prepared to put a one inch cube of cheddar in with it and sniff or taste it afterwards it would be very helpful. This is very small scale so I only need a few testers :)


Dave
User avatar
saucisson
Site Admin
 
Posts: 6851
Joined: Sat Mar 04, 2006 8:46 pm
Location: Oxford UK

Postby Gill » Wed Aug 02, 2006 11:37 pm

Count me in, Dave 8) !

Gill
Gill
Registered Member
 
Posts: 112
Joined: Tue Nov 22, 2005 9:45 pm
Location: Worcestershire

Postby jenny_haddow » Thu Aug 03, 2006 6:15 am

Me too Dave, I've pm'd you.

Jen
User avatar
jenny_haddow
Registered Member
 
Posts: 1331
Joined: Thu Mar 30, 2006 7:54 am
Location: Cambridgeshire and France

Postby tristar » Thu Aug 03, 2006 7:35 am

Hi Dave,

There may be some useful tips on this site: http://www.motherearthnews.com/Green_Home_Building/1974_November_December/How_To_Build_And_Use_A_Sawdust_Stove

The trick for us is this line from the page
It is absolutely essential that the fuel for this stove be bone dry. If it's slightly damp, it will smoke


Line drawings are available on the top right of the page under 'Tools' click on 'Image Gallery'

They have stated that the stoves will burn for up to 12 hours, which would be handy for smoking.

Best Regards,
Richard
"Don't be shy, just give it a try!"
Food for The Body and The Soul
User avatar
tristar
Registered Member
 
Posts: 611
Joined: Thu Dec 22, 2005 11:27 am
Location: Stavanger, Norway

Postby saucisson » Thu Aug 03, 2006 10:22 am

Very interesting read, so we need a very shallow wide one with damp sawdust to maximise smoke and minimise heat, I'll look into it. Thanks!

Dave
Last edited by saucisson on Thu Aug 03, 2006 6:24 pm, edited 1 time in total.
User avatar
saucisson
Site Admin
 
Posts: 6851
Joined: Sat Mar 04, 2006 8:46 pm
Location: Oxford UK

Postby saucisson » Thu Aug 03, 2006 6:23 pm

Gill and Jenny, I will be sending out the testers tomorrow. Jenny is testing a kettle BBQ, what does your smoker look like Gill?

Dave
User avatar
saucisson
Site Admin
 
Posts: 6851
Joined: Sat Mar 04, 2006 8:46 pm
Location: Oxford UK

Postby jenny_haddow » Thu Aug 03, 2006 6:28 pm

Looking forward to receiving the fruits of your labours Dave. I'll give it my best shot.

Cheers

Jen
User avatar
jenny_haddow
Registered Member
 
Posts: 1331
Joined: Thu Mar 30, 2006 7:54 am
Location: Cambridgeshire and France

Postby Gill » Thu Aug 03, 2006 11:28 pm

:oops:

My smoker looks like an up-ended wooden tea chest with a digital thermometer tuck through a hole at the same level as the meat racks and a wooden baffle at the bottom.

Well... let's be honest... it used to look like that. When I built it, I used hot glue and a couple of screws to hold the sides together. Then I inaugurated the whole darned issue by accidentally super-heating it, igniting the baffles, and breaking the hot glue so that one of the sides fell off. There's no way I'm taking a photograph to show you the sorry state it's in now :lol: !

The good news is that it can be repaired quite easily, but even if that wasn't the case I'd still be able to use my Brinkmann Hot Smoker.

Gill
Gill
Registered Member
 
Posts: 112
Joined: Tue Nov 22, 2005 9:45 pm
Location: Worcestershire

Postby saucisson » Fri Aug 04, 2006 4:15 pm

They're in the post, pictorial instructions as to what to do with the bits are here:

http://homepage.ntlworld.com/jackie.mar ... smokin.htm

The charcoal disks light quite easily with a match but at first they don't look alight. It's worth checking after a couple of minutes.

Have fun!!

Dave
User avatar
saucisson
Site Admin
 
Posts: 6851
Joined: Sat Mar 04, 2006 8:46 pm
Location: Oxford UK

Postby Gill » Fri Aug 04, 2006 5:18 pm

Wow :shock: !

What an original use for loo rolls. I wonder if Blue Peter would be interested.

I'll try to run a test when my wood source is restored - probably in a fortnight or so :( . In the meantime, what's the charcoal disc that you use? Is it just a normal briquette?

Gill
Gill
Registered Member
 
Posts: 112
Joined: Tue Nov 22, 2005 9:45 pm
Location: Worcestershire

Postby jenny_haddow » Fri Aug 04, 2006 5:25 pm

Thanks Dave, this is going to be fun. I thought I'd chuck in some garlic along with some cheese and see what we get.

Will report back when tests are complete.

Cheers

Jen
User avatar
jenny_haddow
Registered Member
 
Posts: 1331
Joined: Thu Mar 30, 2006 7:54 am
Location: Cambridgeshire and France

Postby saucisson » Fri Aug 04, 2006 5:38 pm

Gill wrote:Wow :shock: !

What an original use for loo rolls. I wonder if Blue Peter would be interested.

I'll try to run a test when my wood source is restored - probably in a fortnight or so :( . In the meantime, what's the charcoal disc that you use? Is it just a normal briquette?

Gill


Gill, I have posted you everything you need for a test run except the loo roll :) ie base/heat shield, wood chips and charcoal disk. The charcoal disks are food grade designed for incense burners and come from the link Wohoki posted earlier in this thread.


Good luck both of you!

Dave
User avatar
saucisson
Site Admin
 
Posts: 6851
Joined: Sat Mar 04, 2006 8:46 pm
Location: Oxford UK

Postby jenny_haddow » Mon Aug 07, 2006 12:59 pm

Hi Dave,

The package arrived this morning. I'll clean out the barbecue and give it a whirl. I thought I'd do a bit of garlic and a piece of cheese. Will report back on results.

Jen
User avatar
jenny_haddow
Registered Member
 
Posts: 1331
Joined: Thu Mar 30, 2006 7:54 am
Location: Cambridgeshire and France

Postby Gill » Mon Aug 07, 2006 2:17 pm

Hi Dave

Mine arrived too :D . Thanks very much. I'll have a bash over the next couple of days.

Gill

PS what sort of wood pellets do you use and where do you get them from? Sorry if you've already told us, but having them in front of me reminds me that I can't recall seeing anything like that before.
Gill
Registered Member
 
Posts: 112
Joined: Tue Nov 22, 2005 9:45 pm
Location: Worcestershire

Postby saucisson » Mon Aug 07, 2006 2:24 pm

Do you really want to know?

You probably have seen it Gill, just didn't realise it :wink:

It's Waitrose's finest spruce and pine wood pellets.

Get a pellet wet and see what happens to it... it's cat litter :)


Dave
User avatar
saucisson
Site Admin
 
Posts: 6851
Joined: Sat Mar 04, 2006 8:46 pm
Location: Oxford UK

PreviousNext

Return to Smoking and Barbecuing

Who is online

Users browsing this forum: No registered users and 7 guests

cron