Sausage Making for beginners

Beginners FAQ on sausage making, meat curing etc may often be found at the head of each relevant section, but here is the place to ask experienced users for advice if you are still stuck or need more information...we're here to help!

Additives

Postby Jooles » Thu Jan 26, 2006 12:13 am

Hi - another newbie here. Please be gentle with me! I have had a sausage maker (manual stuffer) since 1995 and have been inspired by you all to dust off the cobwebs and have a go. Do I have to add all the additives like preservatives etc? I mean they wont need a shelf life or anything like that so am I ok just to make them without? I still have to make up my mind what to order - is the ordering with a credit card safe - well I suppose it must be but being an internet purchasing virgin I am understandably a little wary. Thank you. :?
Jooles
Newly Registered
 
Posts: 2
Joined: Thu Jan 26, 2006 12:05 am

Postby Paul Kribs » Thu Jan 26, 2006 9:24 am

Jooles,

Welcome to the forum.

If you browse through this forum you will find pretty much everything has been covered and most of your impending questions will have already been asked and answered.

You don't have to use additives/preservatives, they are not essential to a making a good, tastey sausage. I have used the HSBC purchasing facility on this site and have not had any problems. If you are wary then you can do a credit card transaction over the phone, they are very friendly, obliging people. phone #: 01204 433523

Regards, Paul Kribs
User avatar
Paul Kribs
Registered Member
 
Posts: 1588
Joined: Tue Apr 12, 2005 11:41 am
Location: South London, England

Postby welsh wizard » Thu Jan 26, 2006 4:55 pm

Welcome Jooles

I dont put preservatives in my sausages but I make sure I eat them PDQ or pop them in the freezer. Once you have minced your meat the shelf life shortens so I tend to keep them in the fridge no more than 2-3 days before they become freezer fodder.

Good luck WW
User avatar
welsh wizard
Registered Member
 
Posts: 1459
Joined: Wed Mar 30, 2005 8:56 am
Location: Welsh Borders

Reply

Postby Jooles » Fri Jan 27, 2006 3:49 pm

Thank you both very much - I will give it a go - although I hope my wrists dont give out due to the hand action on the manual stuffer!!!! I think its an obsolete instrument. Anyway thank you again.
Jooles
Newly Registered
 
Posts: 2
Joined: Thu Jan 26, 2006 12:05 am

Postby Rik vonTrense » Tue Feb 28, 2006 1:28 pm

Well it's a month since the last beginners posting so we will keep the pot boiling so to speak.

A few years ago I started to get interested in cooked meats but not so much sausages more so a breakfast sausage and liver sausage those types of things,

Being an avid artisan cheesmaker for a few years I wanted to spread my wings a bit included in my repetoire was Haggis as there is a Scots in the family.

I was searching around for some skins other than those I got from the local butcher, I wrote to a firm and they very kindly sent be some plastic skins about 3 inches across...ideal for a liver sausage or a breakfast sausage.
Only thing was there was about 200 yards of the things,

Now I only had a kenwood sausage maker/stuffer and this was only good enough for chipolatas so the bigger skins I had to stuff by hand with a tin tube and a poker.

My main problem was spice mixes as I never knew these forums existed.
When I was a butchers boy during WW2 we used to maker sausages when the meat was available and some weired meats used to go into those I can tell you.....but in the downstairs old fridge which was used as a store room there was a couple of sacks of spices for the sausage mixes. One was red and had a delghtful spicey smell the other was white and went into the pork sausages,,,,in them days the stale loaves from the bakers used to go into the sausages and as much bread as possible was used.

The sausage stuffer was a huge Reber type with a side handle that I used to have to crank whilst the butcher handled the links.

I have just acquired a reber stuffer that I bought off of ebay. It was used once to make a batch of sausages for a barbeque and is praticaly new in it's original box and cost me �80.

My technical questions are what beef cuts does one use for beef sausages ?.

I have made beef burgers with a franco burger press using 50/50 rump steak and pork belly with his texan spice mix and they were delightful.
and if I make pork sausages I will use Shoulder and belly.

What I have to be careful at with the beef sausages is not to have any bits of gristle or the like because the kids don't like bits.

I must make some saveloys and I am sorting out one of Parsons spice mixes to use.

I got some calogen skins with this machine does one have to soak these before use? They seem a bit fragile and papery.

Thanks for listening Guys.......German sausages are on my agenda too......

.
Rik vonTrense
User avatar
Rik vonTrense
Registered Member
 
Posts: 558
Joined: Sat Feb 18, 2006 6:18 pm
Location: GOFFS OAK..SE HERTS

Postby TJ Buffalo » Thu Aug 10, 2006 3:32 am

Rik vonTrense wrote:My technical questions are what beef cuts does one use for beef sausages ?.
.

Congratulations on grabbing the stuffer, that's a good price. As for beef, I usually use some beef chuck when making beef-based sausage.
TJ Buffalo
Global Moderator
 
Posts: 719
Joined: Sun Jul 10, 2005 2:07 am
Location: New Jersey, USA

My First String Of Sausages

Postby Muncher » Wed Aug 30, 2006 7:01 am

I made my first string of sausages on Sunday, which even if I say so myself, were a great success. While I was making them, everyone said how disgusting they looked, and that I had better be prepared to eat them all myself (which I was). Once complete, the moans changed to "Wow - those look just like real sausages"! And once I started cooking them, four pounds got eaten by family and friends by the end of the day.
I used 3lb of pork belly and 3lb of shoulder, with a 'pork & apple' rusk/seasoning mix, 6 cloves of garlic, a handful of sage and a glass full of sake (and 400 ml water).
I have several questions:

Using a number 10 mincer with 6mm plate, I minced the pork, and mixed in the other ingredients. When stuffing the hog casings, I had great difficulty getting the mixture back through the mincer. Unlike the first mincing operation, where the diced pork was drawn nicely into the screw, it seemed that the only way to get the mixture through was to be constantly pressing it down in the hopper. This wouldn't have been so bad, but with one hand turning the crank, and the other controlling the sausage extrusion, you needed an extra hand! Is this just a fact of life with a hand mincer, or would it imply that the consistency of the mixture was poor?

With a little experimentation, I managed to tie the sausages in a long string of threes, which, even if I say so myself, looked really professional. When I cut them up and started cooking them, however, some of the ends opened up, and the filling expanded out. Not a huge problem, I know, but I wondered if this would infer that I had not twisted them sufficiently, or had overstuffed the casings?

When cutting into a finished, cooked sausage (mmmmm), they had a tendency to be a little crumbly, and did not hold together very well. Again, not really a problem, but would this be due to not having enough rusk, not sufficient fat, or just being in too much of a hurry to eat them?

I know these points are only minor, but in my quest for the perfect sausage, I think I'm going in the right direction.
User avatar
Muncher
Registered Member
 
Posts: 6
Joined: Wed Aug 23, 2006 12:54 pm
Location: Wiltshire

Postby saucisson » Wed Aug 30, 2006 9:50 am

My (admittedly still limited) experience of using a mincer to stuff is it gums up if you try to fill the hopper as you end up with a solid block of sausage meat from one end to the other. This may be because the thread of the worm screw finds it harder to get a purchase on the already minced meat and you end up doing the work pushing it through the mincer with the plunger. It's much better to drop 1 or 2" balls of your forcemeat into the mincer and let it carry the meat through itself a bit at a time. Also make sure the forcemeat is good and cold before passing it through the 2nd time. And finally, did you rest the sausages overnight before cooking? This improves the flavour and possibly the texture but I can't really comment on this as I've always been too impatient and cooked them immediately :)

Dave
User avatar
saucisson
Site Admin
 
Posts: 6851
Joined: Sat Mar 04, 2006 8:46 pm
Location: Oxford UK

Postby dougal » Wed Aug 30, 2006 10:58 am

Hi Muncher and welcome!
I'm a bit of a sausage novice too. I'm trying to make "all meat" sausages specifically without the rusk and all the liquid it absorbs. Hence I'm unfamiliar in the ways of the stuff - but - it sounds to me as though your forcemeat mix may have been too dry and stiff.
I gather that you added about 600ml of liquid to about 3 kg of meat and an unspecified quantity of dried apple, dry rusk, and (possibly dried) sage.
It sounds dry to my inexperienced ear.
The stuffing difficulty (and I think the swelling) sounds also like a bit too dry (with rusk).

Were there any suggestions with your flavoured rusk as to an addition rate, wrt the meat, and the amount of liquid that should be added with it?

I struggle with a screw-feed stuffer adaptation of my mincer. It seems apparent from the evidence of others on here that a *piston* stuffer (with some form of mechanical advantage, like hand crank gearing) makes stuffing a much simpler and more enjoyable task. Another bullet I'm going to have to bite...
However, re-mincing while stuffing (something I gather some folk try to do) makes things even worse. You should try to give the meat the simplest, free-est, passage to the stuffing horn.
dougal
Registered Member
 
Posts: 344
Joined: Sun Apr 30, 2006 9:45 pm
Location: Kent, UK

Postby hoggie » Wed Aug 30, 2006 11:36 am

hi Muncher, the mix of belly, and shoulder should give you enough fat. The only thing i can suggest is to add more water, and make sure you give it a really good mix before stuffing. i'll include a pic of my last sausages. Note the oil in the pan is not from the sausage. Imagees. cheers john.
hoggie
Registered Member
 
Posts: 85
Joined: Tue Dec 06, 2005 2:52 pm
Location: ayrshire scotland

Postby hmmm sausages » Wed Aug 30, 2006 12:17 pm

With regards to crumbly mix, i found that if you dont mix the sausage mix enough before you stuff it, it can be a bit crumbly, like cooked mince goes. get yours hands in the bowl and give it a good squeeze so the mix really binds together to form a good sausage meat consistency. Im no expert either so I wont comment on your recipe but i find no more than 10% rusk is best but the mixing really makes a difference

Also, over stuffing can lead to a bit of oozing when you cook them, or cooking them too hot can force it out and cause splitting

hope that helps and enjoy your sausage making

Rob
hmmm sausages
Registered Member
 
Posts: 230
Joined: Sat Jan 07, 2006 12:13 pm
Location: Cheshire

Postby Muncher » Thu Aug 31, 2006 6:55 am

Thanks for the tips everyone.

It sounds like the general view is that is was all a bit on the dry side.

I'm interested to know, Dougal, what the result is without the rusk. The stuff I used was all premixed with the seasoning for a fixed amount of meat. I had read that a small amount of rusk was a necessity to bind it all together, but then you seem to get different advice wherever you look. I'm all for leaving it out, but what is the effect?

I'm beginning to get the feeling that Santa may have a vertical stuffer for me tucked in the bottom of his sack.
User avatar
Muncher
Registered Member
 
Posts: 6
Joined: Wed Aug 23, 2006 12:54 pm
Location: Wiltshire

Postby dougal » Thu Aug 31, 2006 10:18 am

Muncher wrote:... I'm interested to know, Dougal, what the result is without the rusk. The stuff I used was all premixed with the seasoning for a fixed amount of meat. I had read that a small amount of rusk was a necessity to bind it all together, but then you seem to get different advice wherever you look. I'm all for leaving it out, but what is the effect? ...

You'll get different recommendations, because people have different preferences.
But also they can have different understandings.
The standard *British* sausage has rusk (and various other stuff).
Its kinda what most British folk expect.
So primarily preference and expectation.
I'd rather not dilute or 'extend' the sausage ingredients.
But that's just me. And a load of foreigners!
So much for the effect on result.
"Chaqu' un � son gout" as the neighbours say.

As to the effect on method.
I think I may mix it more vigorously than one would need to if one was using binders, emulsifiers, etc. And I suspect that the mixing temperature may be more critical (need to be lower).
I'm not an expert on this by any means.
But I'm sure there are many more expert (particularly in the use of rusk) than myself that can give their opinions.

If you are getting a texture at all like cooked mince, yes it could well be under mixing - but if was minced to hot, no amount of mixing will give you a properly smooth (non-gritty) sausage.
Some folk cut up their meat to size for their mincer, marinade it in the fridge with their flavourings, then chill it for half an hour in the freezer - and mince it while its still 'crisp' from the chilling. *Cold* mincing does make a big difference to the sausage quality.

After mixing, before stuffing, it really is worthwhile to make a slim mini-burger (1 or 2" diameter) from your forcemeat and fry it immediately. Apart from checking flavour and seasoning, you'll get some idea of the likely texture. And at that stage it's still possible to try and make changes if needed.
dougal
Registered Member
 
Posts: 344
Joined: Sun Apr 30, 2006 9:45 pm
Location: Kent, UK

Postby Muncher » Mon Sep 04, 2006 6:28 am

I tried using some more water this time, and ended up with quite a squelchy mixture, and that seemed to do the trick; - it all haung together much better.
User avatar
Muncher
Registered Member
 
Posts: 6
Joined: Wed Aug 23, 2006 12:54 pm
Location: Wiltshire

Postby Fiona » Sat Oct 28, 2006 1:55 pm

Hi. I just made my first batch of sausages following those nice clear instructions from sausagemaker's post. Thanks!
I used a mixture of shoulder and belly pork, hog casing, and Lincolnshire seasoning, and the process was carried out using a Kenwood Chef, mincer attatchment and sausage stuffing tube. They seem to have turned out rather well and currently they are sitting in the fridge to 'bloom'.
I'm just glad I didn't tackle the job when I was at home alone, I think you need about 3 pairs of hands for a beginner!
Can anyone tell me how to re-salt the leftover casings, and how long will they keep for please? (Sorry if this has been answered before).
Fiona
Registered Member
 
Posts: 3
Joined: Sat Oct 28, 2006 1:46 pm
Location: West Yorkshire

PreviousNext

Return to Beginners

Who is online

Users browsing this forum: No registered users and 13 guests