Easy to Make Cold Smoke Generator

Easy to Make Cold Smoke Generator

Postby DarrinG » Mon Sep 10, 2007 2:22 am

Here is a neat bit of kit that someone posted on another forum.

http://cgi.ebay.com/COLD-SMOKE-GENERATO ... dZViewItem

It costs $40 but I bet you could make it for way less. A bit of pipe and some end caps with a small pump. Super easy I think.

DarrinG
User avatar
DarrinG
Registered Member
 
Posts: 371
Joined: Fri Aug 19, 2005 2:19 am
Location: Canada

Postby Richierich » Mon Sep 10, 2007 10:21 am

Found a battery operated air pump, �7.

http://www.aquatics-warehouse.co.uk/aca ... S__81.html
User avatar
Richierich
Registered Member
 
Posts: 879
Joined: Mon Oct 23, 2006 11:55 am
Location: Bicester, Oxfordshire, UK

Postby Richierich » Mon Sep 10, 2007 11:42 am

And a stainless steel utensil holder, by George in ASDA, �3.50.
User avatar
Richierich
Registered Member
 
Posts: 879
Joined: Mon Oct 23, 2006 11:55 am
Location: Bicester, Oxfordshire, UK

Postby saucisson » Mon Sep 10, 2007 1:04 pm

Looks interesting :)

Dave
User avatar
saucisson
Site Admin
 
Posts: 6851
Joined: Sat Mar 04, 2006 8:46 pm
Location: Oxford UK

Postby DarrinG » Tue Sep 11, 2007 12:53 am

From what I know the master piece of pipe is 2" and its 8 inches long.

Right now I'm in the process of getting the pieces to make my own. If I get it done anytime soon I'll post my results.

DarrinG
User avatar
DarrinG
Registered Member
 
Posts: 371
Joined: Fri Aug 19, 2005 2:19 am
Location: Canada

Postby saucisson » Tue Sep 11, 2007 3:00 pm

from the photos it looks as if there nust be a grid in the bottom holding the pellets in, while they light it prior to putting the end cap on. It would be interesting to know what the grid is and how many holes it has in it, or if it is a mesh of some kind. And what stops ash falling into the end cap and melting/blocking the air hose?

Dave
User avatar
saucisson
Site Admin
 
Posts: 6851
Joined: Sat Mar 04, 2006 8:46 pm
Location: Oxford UK

Postby Richierich » Wed Sep 12, 2007 1:58 pm

I think the hose would be better coming in from the side, the utensil holder in ASDA has about 8 holes in it.
User avatar
Richierich
Registered Member
 
Posts: 879
Joined: Mon Oct 23, 2006 11:55 am
Location: Bicester, Oxfordshire, UK

Postby saucisson » Mon Sep 17, 2007 10:30 pm

Based on what we have talked about, I'm going to try and set this up tomorow:

Image

Blame Darren and Rich for the idea :)

You remove the soldering iron once it gets going and put a plug in, I hope :)


Dave
User avatar
saucisson
Site Admin
 
Posts: 6851
Joined: Sat Mar 04, 2006 8:46 pm
Location: Oxford UK

Postby Richierich » Wed Sep 19, 2007 6:09 am

saucisson wrote:Based on what we have talked about, I'm going to try and set this up tomorow:

Image

Blame Darren and Rich for the idea :)

You remove the soldering iron once it gets going and put a plug in, I hope :)


Dave


Nice, does the smoke leave through the top??
User avatar
Richierich
Registered Member
 
Posts: 879
Joined: Mon Oct 23, 2006 11:55 am
Location: Bicester, Oxfordshire, UK

Postby saucisson » Wed Sep 19, 2007 12:41 pm

That's the plan, the can lid hopefully has enough space to allow the smoke around the edges, if not some perforations may be needed. It may not be necessary at all, but to start with I want to try and exclude oxygen as much as possible except what I pump in from below. I haven't tried it yet as I didn't have any tubing, I'm off to the aquarists this afternoon :)

Dave

Edit: didn't happen, the aquarists has gone bust so no pipe, any thoughts of making do went out the window as my 3 year old went down with a stomach bug caught from nursery. I won't bore you with the details :twisted:

D
User avatar
saucisson
Site Admin
 
Posts: 6851
Joined: Sat Mar 04, 2006 8:46 pm
Location: Oxford UK

Postby DarrinG » Thu Sep 20, 2007 1:15 am

Well I'm hoping to have all of my parts to make it this weekend but I'll have to see what happens. I am going to have to find someone who can thread SS pipe for me.

DarrinG
User avatar
DarrinG
Registered Member
 
Posts: 371
Joined: Fri Aug 19, 2005 2:19 am
Location: Canada

Postby saucisson » Thu Sep 20, 2007 11:33 pm

Mawahaaaahaaa :lol:

8 hrs of solid smoke and we are still smoking like there is no tomorrow :D

Of course in true Dave style I changed the design at the last minute :)

D
User avatar
saucisson
Site Admin
 
Posts: 6851
Joined: Sat Mar 04, 2006 8:46 pm
Location: Oxford UK

Postby saucisson » Fri Sep 21, 2007 12:44 am

01:41am and it's still going after I set it up at 4:00pm :D

Dave
User avatar
saucisson
Site Admin
 
Posts: 6851
Joined: Sat Mar 04, 2006 8:46 pm
Location: Oxford UK

Postby saucisson » Fri Sep 21, 2007 1:42 am

2.42 am and it's still going :D
User avatar
saucisson
Site Admin
 
Posts: 6851
Joined: Sat Mar 04, 2006 8:46 pm
Location: Oxford UK

Postby Richierich » Fri Sep 21, 2007 6:52 am

saucisson wrote:2.42 am and it's still going :D


You got any photos. I bought a pump yesterday and was gonna have a go over the weekend. Where are you positioning the bean can, are you ducting the smoke into the smoker, or is it in the smoker. Is it cooler or hotter than the soldering iron on its own, chips or sawdust?

I place my bean can under the brinkmann (stood on a brick to lift it above the bottom of the main chamber) if I brough the air in through the side I guess I could use your method quite easily. The pain in the a**e bit about that way is that to add more wood I have to lift the smoker off the bean can. I was looking to find a way of sealing the bean can and "injecting" the smoke through the shaft of an old golf club I cut up last night. I actually tried drilling down the length of a threaded bar last night so I could use that to put the smoke in, not as easy as it sounds!

The other downside to my brinkmann is that the bottom is of course open, on a windy the smoke just gets whipped out from underneath rather than rising, I have to wrap it with an old duvet cover to keep the wind out.

Sorry for going on!
User avatar
Richierich
Registered Member
 
Posts: 879
Joined: Mon Oct 23, 2006 11:55 am
Location: Bicester, Oxfordshire, UK

Next

Return to Smoking and Barbecuing

Who is online

Users browsing this forum: No registered users and 1 guest