Volcanic Stilton

General Cheese making discussion

Postby Patricia Thornton » Fri Sep 14, 2007 1:42 pm

Hi Richerich. Thank you for your wonderful explanation; I'm with you and doubt that home cheese making is an exact science but I'm still only at the guessing stage. You obviously understand the calculations, I'm afraid I don't.

Being the kind of person who (almost) always believes what an expert tells me the first time I try anything completely new and read that I needed to apply pressure of 50lbs on my precious little cheddar, without engaging the brain, I thought weight equalled pressure. Now I know it isn't the same thing at all, in fact I can even remember a time when I could still wear my 5" stiletto heels and a man explained why I could actually go right through his leather shoe when I stood back on his foot on the underground. (I was quite young and thought he shouldn't have been standing so close in the first place)

Anyway, now I realise there is a difference but I still do not understand how to calculate the actual pressure applied by the weight, especially on my little sample of cheese.

All help is greatfully received and appreciated.


.
Patty
Patricia Thornton
Registered Member
 
Posts: 175
Joined: Fri May 05, 2006 5:26 pm
Location: Bulgaria

Postby saucisson » Fri Sep 14, 2007 1:46 pm

see the post I made 2 seconds before yours Patty :D

Dave
User avatar
saucisson
Site Admin
 
Posts: 6851
Joined: Sat Mar 04, 2006 8:46 pm
Location: Oxford UK

Postby Richierich » Fri Sep 14, 2007 2:04 pm

saucisson wrote:My understanding is that the press is a lever to give your weight a mechanical advantage. This depends on the distance from the pivot point to the point the pressing arm is attached and the distance from there to where the weight is hung. If the distance from the pivot to the pressing arm is 15cm and the distance from the arm is 45cm you have a 3 fold mechanical advantage so your 49 lbs were effectively 147lbs

15cm............45cm............................................49lbs
o------------------o------------------------------------------o

pivot................pressing arm................................weight

Or I could be completely wrong :lol:

Dave


Well put, I think thats what I was trying to say :lol:
User avatar
Richierich
Registered Member
 
Posts: 879
Joined: Mon Oct 23, 2006 11:55 am
Location: Bicester, Oxfordshire, UK

Postby this41uk » Fri Sep 14, 2007 2:46 pm

Image

Could this be the anser :?:

If so it's definatlry 1 for Santa

http://www.ascott.biz/acatalog/Cheese_Presses.html

Tim
Old and Confused but Still a Happy Camper
User avatar
this41uk
Registered Member
 
Posts: 138
Joined: Sun Sep 17, 2006 7:27 pm
Location: West Yorkshire

Postby Patricia Thornton » Fri Sep 14, 2007 3:18 pm

Thank you every one for your help on this one; I think even I can work out how to use my Dutch press now, so there is nothing to stop me going into full production of all the different hard cheeses I can find (as soon as my husband can find the new cowman that is).

With all the cheese I expect to be producing doubtless I'll require the use of both my presses, i.e., my Dutch press and the new Bulgarian version.

This second press is made two hardwood chopping boards and four stainless steel rods on which the top board slides up and down. So, my next question is...............

Yes, you've guessed..............

How do I calculate the pressure applied on my cheese from the weights I stack on the top board?

I think we should have a new topic called 'Ask the Experts' where simple people like me can ask stupid questions in the company of others who feel equally dumb!
Patty
Patricia Thornton
Registered Member
 
Posts: 175
Joined: Fri May 05, 2006 5:26 pm
Location: Bulgaria

Postby BlueCheese » Fri Sep 14, 2007 3:58 pm

Looks great, maybe u got some cultures floating around in your "cave" :)
<a href="http://www3.telus.net/public/hsource/cheesemaking/">The Cheese Hole</a>
User avatar
BlueCheese
Registered Member
 
Posts: 288
Joined: Fri Nov 03, 2006 10:16 pm
Location: Canada,AB

Postby this41uk » Fri Sep 14, 2007 4:32 pm

I'm with you
:wink: :wink:
Tim
Old and Confused but Still a Happy Camper
User avatar
this41uk
Registered Member
 
Posts: 138
Joined: Sun Sep 17, 2006 7:27 pm
Location: West Yorkshire

Postby Richierich » Fri Sep 14, 2007 4:49 pm

Patricia Thornton wrote:Thank you every one for your help on this one; I think even I can work out how to use my Dutch press now, so there is nothing to stop me going into full production of all the different hard cheeses I can find (as soon as my husband can find the new cowman that is).

With all the cheese I expect to be producing doubtless I'll require the use of both my presses, i.e., my Dutch press and the new Bulgarian version.

This second press is made two hardwood chopping boards and four stainless steel rods on which the top board slides up and down. So, my next question is...............

Yes, you've guessed..............

How do I calculate the pressure applied on my cheese from the weights I stack on the top board?

I think we should have a new topic called 'Ask the Experts' where simple people like me can ask stupid questions in the company of others who feel equally dumb!


If it is acting straight down, then its a lot simpler, no turning moments, no leverage, if it says 50kN/m2 then work out the area of the cheese in m2 and multiply that by the force, giving you a kN value. To turn weight into force rely on the fact that there are 10N/kg. So a 22kg weight (49lb as you have now) will exert 220N force. I know that sounds like a little number when compared to 50kN (50,000N) but when you compare the cheese to the size of 1m2 thats a very small number, you would need a weight of 5000kg to exert that force on a 1m2 cheese, but thats a big wheel, about 1.2m diameter.
User avatar
Richierich
Registered Member
 
Posts: 879
Joined: Mon Oct 23, 2006 11:55 am
Location: Bicester, Oxfordshire, UK

Postby Patricia Thornton » Fri Sep 14, 2007 4:59 pm

As I said, ask the experts! Thanks yet again.
Patty
Patricia Thornton
Registered Member
 
Posts: 175
Joined: Fri May 05, 2006 5:26 pm
Location: Bulgaria

Postby jenny_haddow » Fri Sep 14, 2007 10:02 pm

Although I have made a great many cheeses over the past year or so, as a result of this thread I have just learned how to use my Dutch cheese press correctly! Goodness knows what weight I have been pressing with, I've had two large dumbbells hanging off the arm in a carrier bag.
The cheeses have been good though, which reminds me I must make some more soon.
User avatar
jenny_haddow
Registered Member
 
Posts: 1331
Joined: Thu Mar 30, 2006 7:54 am
Location: Cambridgeshire and France

Postby this41uk » Sun Sep 16, 2007 4:37 pm

Well it's met it's maker.

Image

Image

It's a bit strange once you cut of the crust the outer half inch is like gorgonzola and the inner bit is stilton quite weird but nice.

Tim
Old and Confused but Still a Happy Camper
User avatar
this41uk
Registered Member
 
Posts: 138
Joined: Sun Sep 17, 2006 7:27 pm
Location: West Yorkshire

Postby Richierich » Sun Sep 16, 2007 8:13 pm

this41uk wrote:Well it's met it's maker.

Image

Image

It's a bit strange once you cut of the crust the outer half inch is like gorgonzola and the inner bit is stilton quite weird but nice.

Tim


Exactly the same as mine was, don't know why, maybe it had not been left long enough.
User avatar
Richierich
Registered Member
 
Posts: 879
Joined: Mon Oct 23, 2006 11:55 am
Location: Bicester, Oxfordshire, UK

Postby this41uk » Sun Oct 07, 2007 1:03 pm

Well it's all gone now. It tasted nice but it was definitely 2 cheeses in 1. :wink: :wink:

I think my cheese cave (the cellar) may have been a few degrees too warm.

Going to waite till the wheater gets a bit colder and try again.

Tim
Old and Confused but Still a Happy Camper
User avatar
this41uk
Registered Member
 
Posts: 138
Joined: Sun Sep 17, 2006 7:27 pm
Location: West Yorkshire

Postby BlueCheese » Sun Oct 07, 2007 2:34 pm

me too, hard to compeat with the hot weather.
<a href="http://www3.telus.net/public/hsource/cheesemaking/">The Cheese Hole</a>
User avatar
BlueCheese
Registered Member
 
Posts: 288
Joined: Fri Nov 03, 2006 10:16 pm
Location: Canada,AB

Postby jenny_haddow » Mon Oct 08, 2007 8:07 am

I start making cheese about now, when it cools down, and leave off about the end of April. A dedicated cheese fridge is a good idea if you want to make it all year round. I have wound the temperature up in my dairy fridge to about 10 degrees in the past, to mature a cheese, but I worry about the rest of the stuff in there. Saucisson has the right idea.
User avatar
jenny_haddow
Registered Member
 
Posts: 1331
Joined: Thu Mar 30, 2006 7:54 am
Location: Cambridgeshire and France

Previous

Return to Cheese Chat

Who is online

Users browsing this forum: No registered users and 2 guests