Mike D wrote:Dib, Dib, Dave,
I think this is the badge for you...
http://www.scoutbase.org.uk/library/hqdocs/badges/beaver-activity-expe.htm
John, that one Phil posted is spot on
Mike D wrote:Dib, Dib, Dave,
I think this is the badge for you...
http://www.scoutbase.org.uk/library/hqdocs/badges/beaver-activity-expe.htm
wheels wrote:I'd go with this one of Oddley's:New English Brine
IMPORTANT, ONLY USE THESE RATIOS
2 Parts Meat
1 Part Brine
Brine Ingredients
84.79 % - Water
0.21 % - Saltpetre (700 mg/Kg)
10 % - Salt (10.5% Brine concentration)
5 % Sugar
Method:
You may add to this brine any insoluble herbs spices you like ie: whole coriander seeds, whole bay leaves, whole juniper berries. Bring the water to a simmer and add all ingredients, including the insoluble ones. Leave to cool to room temperature. Meanwhile, allow your meat to come to room temperature, and leave it there for about an hour to encourage the lactic acid flora to grow. Find a tight fitting container of food grade plastic, You will need a tight fitting container, because most importantly you are using the brine, 1 part too 2 parts meat. Submerge the meat below the surface and keep it there with a plate or weight, of some kind. Now put it on the top shelf of the fridge, 5 - 6 �C for 10 days per Kg of meat. Or at least 9 days. turning every other day.
Phil
700mg/Kg ???? (can I say 1 gram per kilo as my scales would not measure milligrams
lemonD wrote:John700mg/Kg ???? (can I say 1 gram per kilo as my scales would not measure milligrams
I'd be curious as to 700mg to a Kg of what? If you use 2.1gm then that must mean to 3kg of ?
Phil
I think your post should just read 2Kg meat to 1Kg brine not 1 litre
wheels wrote:If meat is 2kg then use 1kg brine. You will need a close fitting container to do this.
For 1 Kg brine use:
Water 847.9gm
Salt 100gm
Sugar 50gm
Saltpetre 2.1gm
It is not advisable to use saltpetre without scales that will weigh to 1/10th of a gram. (IMO)
You could use 2gm (666 PPM Nitrate) if you are 100% sure that the scales you have can weigh this amount accurately - personally I wouldn't trust the average digital domestic scales for such small amounts.
Phil
saucisson wrote:I would use 102g, because if you use only half as much you may end up with salt pork, not ham. In addition you do need to be curing that ham in the brine or it can start to go off, and while you can brine overnight with just salt, any longer and I like the reassurance of a good dose of nitrogenous compounds in there..
Dave
PS. I posted those collagens off on Wednesday
johnfb wrote:wheels wrote:If meat is 2kg then use 1kg brine. You will need a close fitting container to do this.
For 1 Kg brine use:
Water 847.9gm
Salt 100gm
Sugar 50gm
Saltpetre 2.1gm
It is not advisable to use saltpetre without scales that will weigh to 1/10th of a gram. (IMO)
You could use 2gm (666 PPM Nitrate) if you are 100% sure that the scales you have can weigh this amount accurately - personally I wouldn't trust the average digital domestic scales for such small amounts.
Phil
So my time is getting nearer to cure this back leg for a ham.
I dont have any saltpetre but do have some all purpose curing salts.
So if the recipe calls for 100grm of salt and 2 grm of saltpetre can I just add 102grm of curing salt?
Alternatively, can I add say 50grm of normal salt and 52grm of the curing salts?
Since the saltpetre is only used for colouring and not flavour I would be adding the curing salts for that reason only.
Any ideas guys??
John
Return to Recipes for cured meats
Users browsing this forum: No registered users and 3 guests