Pullman Tins

All about bread

Pullman Tins

Postby eddy current » Sun Sep 28, 2008 10:16 pm

Has anyone got experience of using Pullman tins for breadmaking?
Quanties of dough to size of tins etc.
Anyone know a U.K. source for these tins? I know there are 2 listed on Ebay but any other source could be useful.

http://cgi.ebay.co.uk/1-lb-sandwich-loa ... 8002r29740


Bob
There are things known and things unknown and in between are the doors.
If the doors of perception were cleansed everything would appear to man as it is, infinite.
eddy current
Registered Member
 
Posts: 57
Joined: Wed Aug 23, 2006 1:17 pm
Location: S.W. Cumbria

Postby RodinBangkok » Mon Sep 29, 2008 11:26 am

Sorry can't help with a source in the UK, but for starting out:

Make sure you grease the lid along with the pans.

Scaling is a bit more of a trial and error process, depending on your formula and the amount of oven spring you'll get. If you know how much rise you get from a formula you've used before judge that as the loaf size when you scale for a pullman. Too small and you'll get a rounded loaf that won't reach the lid, not as brown as you may like on the top, but very edible. Too large will show up two ways, during your final rise, or during baking it will start too expand out of any open areas in the pan, but not really a big deal either, I just pop the oven open and trim that off so it won't burn or trim before oven, then be prepared to trim again about 1/3 the way into the bake. You will also find if the loaf is too large and the pan is a tight seal the bread will compress on itself, more dense on the outer areas

Make sure you measure carefully your loaf size for future reference. After about two tries I got my formulas down pat, no further problems.

Oh yeah during the final rise do not try and peak or open the lid, you'll ruin the skin on the loaf that is up against the lid itself.

I use same bake times as open pans for pullmans.

Oh Yeah, here's some good troubleshooting info from Fermipan:

http://www.fermipan.com/content/blogcategory/10/449/
I am the master of my fate:
I am the captain of my soul.
_____

Rod
RodinBangkok
Registered Member
 
Posts: 343
Joined: Wed Aug 13, 2008 7:55 am
Location: Bangkok, Thailand

Postby eddy current » Tue Sep 30, 2008 7:00 am

Rod

Thanks for the information.
Just noticed that the one's listed on Ebay, the company is based in Malaysia!!

Bob
There are things known and things unknown and in between are the doors.
If the doors of perception were cleansed everything would appear to man as it is, infinite.
eddy current
Registered Member
 
Posts: 57
Joined: Wed Aug 23, 2006 1:17 pm
Location: S.W. Cumbria

Postby RodinBangkok » Tue Sep 30, 2008 11:27 am

Here's a couple suppliers in the US:

http://www.lockwoodmfg.ca/main/index.php

http://www.cmbakeware.com/

Would'nt surprise me if CM made the first pullman, they've been around so long.

You may also find them at used equipment dealers.

The ones I get are made locally, easy to find and cheap.

Good Luck
I am the master of my fate:
I am the captain of my soul.
_____

Rod
RodinBangkok
Registered Member
 
Posts: 343
Joined: Wed Aug 13, 2008 7:55 am
Location: Bangkok, Thailand

Postby beardedwonder5 » Mon Jan 19, 2009 12:30 pm

GOS, yeah!!!
beardedwonder5
Registered Member
 
Posts: 342
Joined: Thu Feb 28, 2008 10:21 am
Location: Canterbury, Kent, UK

Postby beardedwonder5 » Mon Jan 19, 2009 12:35 pm

google bakedeco - but pan + lid add up.
GOS, yeah!!!
beardedwonder5
Registered Member
 
Posts: 342
Joined: Thu Feb 28, 2008 10:21 am
Location: Canterbury, Kent, UK


Return to Bread Making

Who is online

Users browsing this forum: No registered users and 7 guests

cron