Tar Condenser

Tar Condenser

Postby wallie » Mon Jan 19, 2009 7:13 am

I read somewhere on the web about needing a Tar Condenser in a cold smoker,
Will someone enlighten me on what that is?

Thanks
wallie
wallie
Registered Member
 
Posts: 578
Joined: Wed Nov 29, 2006 3:05 pm
Location: Newcastle Tyne & Wear

Postby saucisson » Mon Jan 19, 2009 6:23 pm

Wood smoke contains a lot of acidic tar. A tar condenser is a bit like a bottle trap, in which the heavier tarry compounds collect, leaving the sweeter, more volatile aromatics in the smoke to flavour the food. I use one as much to get some of the water vapour out of the smoke so that the humidity in the smoker doesn't get too high as for it's tar removing. It also helps ensure the smoke is at ambient temperature.

The pipe goes in through the top of the red fuel container and is taken down to the bottom in a pipe inside, then works its way back up to the top before exiting out to the smoker.
Image

Dave
Curing is not an exact science... So it's not a sin to bin.

Great hams, from little acorns grow...
User avatar
saucisson
Site Admin
 
Posts: 6851
Joined: Sat Mar 04, 2006 8:46 pm
Location: Oxford UK

Postby spud43 » Fri Jan 30, 2009 5:37 pm

looks good. how often do u have to change water?
spud43
Registered Member
 
Posts: 8
Joined: Tue Jan 27, 2009 7:08 pm

Postby saucisson » Fri Jan 30, 2009 5:59 pm

I tip it out when I can hear the air bubbling through it. I generally get through several overnight smoking sessions before that happens. I have heard suggestions of deliberately setting it up as a bubbler like a middle eastern Hookah to really clean up the smoke but I haven't given that a go.
Dave
Curing is not an exact science... So it's not a sin to bin.

Great hams, from little acorns grow...
User avatar
saucisson
Site Admin
 
Posts: 6851
Joined: Sat Mar 04, 2006 8:46 pm
Location: Oxford UK

Postby spud43 » Sun Feb 01, 2009 2:17 pm

thanks ..mine is bubbling all the time ....would post pic of setup ..but dont know how to ...
spud43
Registered Member
 
Posts: 8
Joined: Tue Jan 27, 2009 7:08 pm

Postby wheels » Sun Feb 01, 2009 2:29 pm

Spud43 - welcome :D

There's a tutorial on posting a photo here:

http://forum.sausagemaking.org/viewtopic.php?t=1610

Phil
User avatar
wheels
Global Moderator
 
Posts: 12894
Joined: Sat Sep 02, 2006 4:29 pm
Location: Leicestershire, UK

Postby spud43 » Mon Feb 02, 2009 9:37 am

http
Last edited by spud43 on Mon Feb 02, 2009 5:03 pm, edited 1 time in total.
spud43
Registered Member
 
Posts: 8
Joined: Tue Jan 27, 2009 7:08 pm

Postby spud43 » Mon Feb 02, 2009 9:44 am

Edited by munki for conversion process - empty image tag was here
Last edited by spud43 on Mon Feb 02, 2009 5:03 pm, edited 1 time in total.
spud43
Registered Member
 
Posts: 8
Joined: Tue Jan 27, 2009 7:08 pm

Postby wallie » Mon Feb 02, 2009 1:18 pm

I am a little confused by these tar traps.
Where exactly is the smoke going in and out,also where is the water container.
I am under the impression that the smoke goes into the bottom of a chamber then as hot air rises goes out of the top of this chamber into the smoker, and the heavier tar deposits drop through a pipe in the bottom of the chamber into a water container.
If this makes sense.

wallie
wallie
Registered Member
 
Posts: 578
Joined: Wed Nov 29, 2006 3:05 pm
Location: Newcastle Tyne & Wear

Postby spud43 » Mon Feb 02, 2009 5:14 pm

im not sure myself...this my setup

Image
Image

pipe on top goes to bottom into water and comes out through front.
spud43
Registered Member
 
Posts: 8
Joined: Tue Jan 27, 2009 7:08 pm

Postby saucisson » Mon Feb 02, 2009 10:35 pm

That's rather large :D

Dave
Curing is not an exact science... So it's not a sin to bin.

Great hams, from little acorns grow...
User avatar
saucisson
Site Admin
 
Posts: 6851
Joined: Sat Mar 04, 2006 8:46 pm
Location: Oxford UK

Postby wallie » Tue Feb 03, 2009 5:58 am

Dave

I am a little confused by these tar traps.
Where exactly is the smoke going in and out,also where is the water container.
I am under the impression that the smoke goes into the bottom of a chamber then as hot air rises goes out of the top of this chamber into the smoker, and the heavier tar deposits drop through a pipe in the bottom of the chamber into a water container.
If this makes sense.


Is my thinking correct, is this what happens?

Thanks
wallie
wallie
Registered Member
 
Posts: 578
Joined: Wed Nov 29, 2006 3:05 pm
Location: Newcastle Tyne & Wear

Postby spud43 » Tue Feb 03, 2009 8:45 am

it is abit on the big side....do the pipes have to be joined?
and how will i stop it bubbling all the time?
thanks
spud43
Registered Member
 
Posts: 8
Joined: Tue Jan 27, 2009 7:08 pm

Postby saucisson » Tue Feb 03, 2009 9:45 am

I'll draw up a diagram of how mine works as it will be easier for me than trying to explain via keyboard :)

Dave
Curing is not an exact science... So it's not a sin to bin.

Great hams, from little acorns grow...
User avatar
saucisson
Site Admin
 
Posts: 6851
Joined: Sat Mar 04, 2006 8:46 pm
Location: Oxford UK

Postby spud43 » Tue Feb 03, 2009 11:21 am

thanks will look foward to that :)
spud43
Registered Member
 
Posts: 8
Joined: Tue Jan 27, 2009 7:08 pm

Next

Return to Smoking and Barbecuing

Who is online

Users browsing this forum: No registered users and 14 guests