New cold smoke generator designed in the UK

Postby probbq » Wed Nov 04, 2009 11:17 am

I would love to have pictures and recipes of everyones/ anyones (those who are willing to share) experiences using the cold smoke generator.
Please email me directly ian@macsbbq.co.uk

Thanks

Ian
Ian

Stacked & smokin!
www.macsbbq.co.uk
User avatar
probbq
Registered Member
 
Posts: 83
Joined: Thu Oct 11, 2007 3:14 pm
Location: Cornwall, UK

Postby wheels » Wed Nov 04, 2009 1:47 pm

WW

I've used it in the bottom of my normal smoker (a fridge like box made out of stainless steel). There seems to be absolutely no reason why it couldn't be used in virtually any container - even a cardboard box, as long as adequate measures were taken to prevent the box setting on fire.

Phil
User avatar
wheels
Global Moderator
 
Posts: 12894
Joined: Sat Sep 02, 2006 4:29 pm
Location: Leicestershire, UK

Postby welsh wizard » Wed Nov 04, 2009 2:05 pm

Hi Jen / Wheels

I am going to try it in the Bradley both in the detatched cold smoking box and also just placing it in the bradley itself. My guess it will work fine in the bradley but may have to go into the detatched box when the warmer weather comes.

Also I am going to experiment with a range of cardboard boxes and old cooker grills on bricks

cheers WW
Only those who go too far know how far they can go TSE
User avatar
welsh wizard
Registered Member
 
Posts: 1459
Joined: Wed Mar 30, 2005 8:56 am
Location: Welsh Borders

Postby culinairezaken » Wed Nov 04, 2009 3:58 pm

i think it can go straight into the bradley, it produces virtually no heat!
User avatar
culinairezaken
Registered Member
 
Posts: 176
Joined: Sat Oct 03, 2009 8:33 am
Location: Haren, The Netherlands

Postby saucisson » Wed Nov 04, 2009 6:40 pm

probbq wrote:I would love to have pictures and recipes of everyones/ anyones (those who are willing to share) experiences using the cold smoke generator.
Please email me directly ian@macsbbq.co.uk

Thanks

Ian


Hi Ian, I assume you have what you would want from me from my review, please let me know if you want any of the photos in higher res etc.

Dave
Curing is not an exact science... So it's not a sin to bin.

Great hams, from little acorns grow...
User avatar
saucisson
Site Admin
 
Posts: 6851
Joined: Sat Mar 04, 2006 8:46 pm
Location: Oxford UK

Postby probbq » Wed Nov 04, 2009 10:42 pm

Dave, thank you, yes I have everything, in fact I have just got a direct link to your review thread.
I'm really looking for recipes, pics of ways/ containers that people use the unit in, that sort of thing.
Ian

Stacked & smokin!
www.macsbbq.co.uk
User avatar
probbq
Registered Member
 
Posts: 83
Joined: Thu Oct 11, 2007 3:14 pm
Location: Cornwall, UK

Postby mitchamus » Thu Nov 05, 2009 1:42 am

saucisson wrote:1160mm measured by string :D

Dave


awesome - thanks Dave.
mitchamus
Registered Member
 
Posts: 452
Joined: Wed Dec 03, 2008 10:50 pm
Location: Sydney/Snowy Mountains Australia

Postby probbq » Thu Nov 05, 2009 2:12 pm

mitchamus wrote:
saucisson wrote:1160mm measured by string :D

Dave


awesome - thanks Dave.

Still curious to know what you're up to.

Anyways I've built the cardboard smoker, now waiting for some Salmon to brine...

* A cardboard box, the one I’ve used measures 16” x 13” x 22”.

* 4 x Lengths of wood doweling, I’ve substituted these for some long skewers.

* A ProQ™ Cold Smoke Generator.

* A flat baking tray (larger than the base of the ProQ™ Cold Smoke Generator).

* 2 x Oven grates, or any other grates that will fit.

Image

Image

Image

Image

Image

Image

Image

Image
Ian

Stacked & smokin!
www.macsbbq.co.uk
User avatar
probbq
Registered Member
 
Posts: 83
Joined: Thu Oct 11, 2007 3:14 pm
Location: Cornwall, UK

Postby welsh wizard » Thu Nov 05, 2009 3:03 pm

Just a quick question

Will the unit work if you dont fill it up to its full 10 hour load?

cheers WW
Only those who go too far know how far they can go TSE
User avatar
welsh wizard
Registered Member
 
Posts: 1459
Joined: Wed Mar 30, 2005 8:56 am
Location: Welsh Borders

Postby probbq » Thu Nov 05, 2009 3:08 pm

welsh wizard wrote:Just a quick question

Will the unit work if you dont fill it up to its full 10 hour load?

cheers WW


Yes
Ian

Stacked & smokin!
www.macsbbq.co.uk
User avatar
probbq
Registered Member
 
Posts: 83
Joined: Thu Oct 11, 2007 3:14 pm
Location: Cornwall, UK

Probbq smoker

Postby wallie » Fri Nov 06, 2009 10:14 am

Tried out the bbq cold smoker, but it never produced much smoke.
Fair enough it burnt for 10 hours but there was just a wisp of smoke coming off it.
I hung some sausages I had made and dried off and after 10hours I never tasted much smokiness when I had a bite.
I wonder if I am doing something wrong, especially after reading good reports on it.
I used the dust supplied with the kit maybe it was damp but still I would not have thought it would of burnt if that was so.
I wonder if it would perform better in a smaller cabinet, mine is about the size of the Bradley.
Any comments welcome.

wallie
wallie
Registered Member
 
Posts: 578
Joined: Wed Nov 29, 2006 3:05 pm
Location: Newcastle Tyne & Wear

Postby probbq » Fri Nov 06, 2009 1:51 pm

Hi Wallie,
I'll try to answer your questions...
Firstly, the amount of smoke required to flavour food is minimal, basically you need as much smoke going out as the amount going in, so you may have to close your top vent a bit. Billowing smoke, or smoke that is trapped in the smoker, will leave a "creasote like" residue and taste.

The ProQ CSG is designed to release just a wisp of smoke, so I doubt it had anything to do with the dust being damp, and as you suggest, it would probably not have burnt if it was damp.

I also think that the casings used for the sausages may affect the amount of smoke being absorbed, but I am no sausage expert, so I hope someone who is chimes in.

I also find that resting the food, for at least 24 hours, before tasting, really enhances the smokey flavour.

I do hope this helps and I am sure some of the more experienced members will also have some ideas for you to consider.

Ian
Ian

Stacked & smokin!
www.macsbbq.co.uk
User avatar
probbq
Registered Member
 
Posts: 83
Joined: Thu Oct 11, 2007 3:14 pm
Location: Cornwall, UK

Postby wheels » Fri Nov 06, 2009 2:47 pm

Wallie

It's basically as Ian says - but if you want a smokier flavour just put it in twice. Given that it requires (almost less than) minimal attention, it isn't a problem.

Phil
User avatar
wheels
Global Moderator
 
Posts: 12894
Joined: Sat Sep 02, 2006 4:29 pm
Location: Leicestershire, UK

Postby Richierich » Fri Nov 06, 2009 4:19 pm

Had a go at lunchtime with the home made dust from shavings, still needs a little more drying. Dave - how long did you dry my wood for?

I am also thinking it might be time to build a little wooden cabinet for the smoking, I could even put a cardboard box in it, just want weather proof as it will be out side.
User avatar
Richierich
Registered Member
 
Posts: 879
Joined: Mon Oct 23, 2006 11:55 am
Location: Bicester, Oxfordshire, UK

Postby saucisson » Fri Nov 06, 2009 4:31 pm

I write things like that down so I don't have to remember them. When I don't remember to write them down I look foolish...

I would guess an hour and a half at 200 deg C, that's how long the chicken in a lidded roasting dish next to it was in there for :lol:

I ground it then dried it if that helps.

Dave
Curing is not an exact science... So it's not a sin to bin.

Great hams, from little acorns grow...
User avatar
saucisson
Site Admin
 
Posts: 6851
Joined: Sat Mar 04, 2006 8:46 pm
Location: Oxford UK

PreviousNext

Return to Smoking and Barbecuing

Who is online

Users browsing this forum: No registered users and 16 guests