by Chuckwagon » Sat Nov 21, 2009 8:27 am
Hi dbairduk,
I’m not from the UK but my mother was. BUT.. I do know how to deep fry a turkey. Here are a few suggestions. I hope this info helps.
About fifteen years ago, at the ranch blacksmith shop, we fashioned a round metal plate for a turkey to rest upon, with drilled holes (for dripping hot oil) and tapped to receive a threaded 3/8" stainless steel rod that was placed through the cavity of a meleagris ocellata. The non-threaded end of the rod was formed into a loop for easy lifting with a hay-bale hook... and we always pre-planned just where to put it down to rest.
You may purchase a turkey deep-frying outfit from Northern Tool or make your own easily. NT uses a 30-quart aluminum stockpot that will hold an 18-pound turkey. It comes with a base with legs and thermometer. The 55,000 BTU gas cooker comes with a hose and regulator but no propane tank. The cost is $74.99 (GBP 123.74) and I bought one for my brother. Found it to be very nice. A cook must be extra careful as hot oil and moisture just do not do well together and wet food will react violently.
Deep-frying a turkey should always be done outdoors and always with only peanut oil. Select a pot with plenty of room to baptize the bird and enough oil to completely immerse it. Determine the volume of oil required by placing the turkey in the pot and covering it with enough water to submerge it with an inch to spare. Mark the side of the pot where the water line appears then, removing the turkey, pat it completely dry. Dump the water, wipe the pot dry, add enough peanut oil to reach the mark, and preheat it to 375° F. (191°C.) using a propane burner frame with straight legs. Although "tented" or angled legs may provide more stability, they have "feet" to trip over while you are handling hot, sizzlin' oil. Please clear away any rocks, long grass, the family dog, and especially children! If possible, have another person help you with the process. Each November, about half a dozen houses burn down in America because of the mishandling of deep-fried turkey oil.
Deep-fried turkey is most tasty! Prepare the turkey by thawing, cleaning, and drying it completely then rubbing it inside the body cavity, and beneath the skin, with butter and your favorite rub n’ spicy mixture. Preheat the oil to 375°F. (191°C.), place the turkey on the stand, attach the steel rod, then lower it very slowly into the oil, minimizing any splattering. The temperature of the oil will drop to about 325°F. (163°C.) when the turkey is added but it should recover to 350°F. (177°C.) quickly. If not, adjust the flame up or down to maintain 350°F. (177°C.). Cook the bird three minutes per pound... plus five minutes. Always allow an additional five minutes cooking time, no matter how large the turkey. Whenever checking the temperature of the meat with a thermometer, insert it in the thickest part of the thigh, being careful to avoid bone. When it is done, the thermometer should read 165 to 170° F. (77°C.) Always allow deep fried turkey to rest for fifteen minutes before carving it.
Lowering and raising the turkey from scalding hot oil is not a last minute consideration. Never - never - never immerse a frozen turkey into hot oil. The handling strategy must be pre-planned with equipment clean and ready to use. Having lifted a fifteen-pound, dripping, hot bird from boiling oil, it is absolutely not the time to start looking around for a place to put it down. My mother was once seriously burned about the arms and chest with hot oil. It is nothing to fool with and I recommend using eye goggles and thick gloves.
Good luck and please let us know how it works out for you. Best wishes, Chuckwagon
If it looks like a duck, quacks like a duck, and walks like a duck, it probably needs a little more time on the grill.