smoking bacon and sausage using bradley smoker

smoking bacon and sausage using bradley smoker

Postby bmvbutchergav » Fri Mar 26, 2010 8:14 am

Whats the best method of smoking bacon in a bradley smoker?

dry cure meat then after several days put into the smoker or smoke first then cure?

cold smoking sausage method using bradley smoker?
bmvbutchergav
Registered Member
 
Posts: 30
Joined: Mon Feb 15, 2010 6:22 pm

Postby NCPaul » Fri Mar 26, 2010 11:18 am

You should always cure the bacon before you smoke it. The curing should take 7-10 days depending on the thickness of the bacon. There are ways of converting a Bradley to cold smoke. Good Luck. :D
Fashionably late will be stylishly hungry.
NCPaul
Site Admin
 
Posts: 2935
Joined: Thu Oct 01, 2009 12:58 am
Location: North Carolina

Postby Ianinfrance » Fri Mar 26, 2010 8:43 pm

Hi

I have been cold smoking gammon & bacon in the Bradley since I got mine at Christmas. Not much expereince I grant you, but fresh enough in my mind.

While you _can_ cold smoke in it, using the smoke generator in place, you need to watch the temperature as it's raised quite considerably by the device (500w) which heats the bisquettes. There are two solutions. Either physically separate the smoke generator or use the CSG which is sold by MacBBQ http://www.macsbbq.co.uk/CSG.html. I have chosen the latter route, because the cost of bisquettes is very high.

Putting the cold smoke generator in the bottom of the Bradley, (with the Bradley generator present but unused) works fine, and with the ventilator just cracked open, to allow quite a smoke build up in the chamber, I found that I was happy with one single smoke load = 10 hours. I was able to smoke about 6 kg of bacon in one single batch. At about £1 a batch, that's really a very reasonable cost hit for smoking.

When smoking bacon, as Paul said, you will need to cure the bacon first. For belly, (which is about 5-6 cm thick, I make up a very simple cure (using European 0.6% Nitrited salt) of 2 parts salt to one part of sugar (raw cane, such as muscovado or demerara) and some pepper. I rub the meat with that in the proportions of 37.5 g of cure per kilo and close wrap (vacpack) and leave for a week in the fridge. After a good wash and dry, it should be left in a ventilated fridge overnight, longer in a non ventilated fridge, to let the bacon form a pellicle - at which point it can be cooked or otherwise used as "green bacon". And you then smoke it.

Hope that's reasonably clear and simple.
All the best - Ian
"The Earth is degenerating today. Bribery and corruption abound. Children no longer obey their parents, every man wants to write a book, and it is evident that the end of the world is fast approaching." c. 2800 BC
Ianinfrance
Registered Member
 
Posts: 730
Joined: Sun Oct 22, 2006 4:24 pm
Location: Forgès, France

Postby wheels » Fri Mar 26, 2010 8:59 pm

There is a tutorial for dry cured bacon here:

http://forum.sausagemaking.org/viewtopic.php?t=4835

You smoke it after curing. In the UK bacon is generally cold smoked. The easiest way is the CSG that Ian has linked to although you can adapt a bradley to cold smoke by placing a box between the generator and the chamber to allow the smoke to cool.

If you smoke sausage ensure you use a recipe with cure #1 (or a nitrite cure) in it for safety reasons.

Phil
User avatar
wheels
Global Moderator
 
Posts: 12894
Joined: Sat Sep 02, 2006 4:29 pm
Location: Leicestershire, UK

Postby Jaunty » Thu Apr 08, 2010 10:05 pm

Ian thanks! The info in this post was just what I was after knowing about the CSG. Cheers.

Ianinfrance wrote:Hi

I have been cold smoking gammon & bacon in the Bradley since I got mine at Christmas. Not much expereince I grant you, but fresh enough in my mind.

While you _can_ cold smoke in it, using the smoke generator in place, you need to watch the temperature as it's raised quite considerably by the device (500w) which heats the bisquettes. There are two solutions. Either physically separate the smoke generator or use the CSG which is sold by MacBBQ http://www.macsbbq.co.uk/CSG.html. I have chosen the latter route, because the cost of bisquettes is very high.

Putting the cold smoke generator in the bottom of the Bradley, (with the Bradley generator present but unused) works fine, and with the ventilator just cracked open, to allow quite a smoke build up in the chamber, I found that I was happy with one single smoke load = 10 hours. I was able to smoke about 6 kg of bacon in one single batch. At about £1 a batch, that's really a very reasonable cost hit for smoking.

When smoking bacon, as Paul said, you will need to cure the bacon first. For belly, (which is about 5-6 cm thick, I make up a very simple cure (using European 0.6% Nitrited salt) of 2 parts salt to one part of sugar (raw cane, such as muscovado or demerara) and some pepper. I rub the meat with that in the proportions of 37.5 g of cure per kilo and close wrap (vacpack) and leave for a week in the fridge. After a good wash and dry, it should be left in a ventilated fridge overnight, longer in a non ventilated fridge, to let the bacon form a pellicle - at which point it can be cooked or otherwise used as "green bacon". And you then smoke it.

Hope that's reasonably clear and simple.
Jaunty
Registered Member
 
Posts: 173
Joined: Sun Oct 12, 2008 3:36 pm
Location: London, England


Return to Smoking and Barbecuing

Who is online

Users browsing this forum: No registered users and 18 guests