What happens if you go over the curing time?

Recipes and techniques using brine.

What happens if you go over the curing time?

Postby ped » Fri Mar 23, 2012 7:31 am

Hi there

I currently have my first pastrami curing and am curious to know what is the outcome if I leave it in the cure for too long?, does it just make the meat salty and unpallatable or is there a health risk because of the cure1?
ped
Registered Member
 
Posts: 395
Joined: Fri May 08, 2009 11:03 am
Location: Kent

Postby wnkt » Fri Mar 23, 2012 2:50 pm

You can always soak the meat after curing, in several changes of water to leach some of the salt out.
User avatar
wnkt
Registered Member
 
Posts: 55
Joined: Fri Mar 18, 2011 1:44 am
Location: South Carolina, USA

Postby ped » Fri Mar 23, 2012 7:22 pm

Thanks wnkt, I appreciate that but I would like an answer to the question not an answer to the result of what the outcome might be?! if that makes sense? (probably not :oops: ).
ped
Registered Member
 
Posts: 395
Joined: Fri May 08, 2009 11:03 am
Location: Kent

Postby wheels » Fri Mar 23, 2012 7:49 pm

Ped, are we talking dry cure? Injection Cure? Brine Cure?

Phil
User avatar
wheels
Global Moderator
 
Posts: 12894
Joined: Sat Sep 02, 2006 4:29 pm
Location: Leicestershire, UK

Postby ped » Sat Mar 24, 2012 8:52 am

Brine cure Phil
ped
Registered Member
 
Posts: 395
Joined: Fri May 08, 2009 11:03 am
Location: Kent

Postby Jogeephus » Sat Mar 24, 2012 2:48 pm

I've made a few salt licks out of pigs legs before. :oops:
Patience please, I'm just trying to get on the learning curve.
Jogeephus
Registered Member
 
Posts: 380
Joined: Mon Dec 07, 2009 12:17 pm
Location: Nashville, Georgia USA

Postby wheels » Sat Mar 24, 2012 4:51 pm

Depending on the recipe it may become very salty and may exceed the recommended levels for nitrite/nitrate. There is more chance of this with brine recipes calling for short curing times rather than the longer 'equilibrium' cures. Did you have a particular cure in mind?

Phil
User avatar
wheels
Global Moderator
 
Posts: 12894
Joined: Sat Sep 02, 2006 4:29 pm
Location: Leicestershire, UK

Postby ped » Sat Mar 24, 2012 6:44 pm

Yes,I got the pastrami cure from a thread on this site but for the life of me I can't find it!!, but it involved just a 5% salt solution and as was the case for the person who originated the thread/cure I do not intend to boil it but to actually hot smoke it. The cure was 5% salt 2.5% sugar and .5% cure1 per 1ltr of water.
So I believe that my only concern should be the saltyness rather than anything else?, but am very happy to be advised otherwise?? !! (before I kill myself)
ped
Registered Member
 
Posts: 395
Joined: Fri May 08, 2009 11:03 am
Location: Kent

Postby wheels » Sat Mar 24, 2012 7:11 pm

Just to be sure - What weight meat in what quantity of brine? But, unless you had a small pork chop in an oil drum of cure you ain't going to be killing yourself!
User avatar
wheels
Global Moderator
 
Posts: 12894
Joined: Sat Sep 02, 2006 4:29 pm
Location: Leicestershire, UK

Postby ped » Sun Mar 25, 2012 8:07 am

1.78kg meat in 3 litres brine
ped
Registered Member
 
Posts: 395
Joined: Fri May 08, 2009 11:03 am
Location: Kent

Postby wheels » Sun Mar 25, 2012 7:04 pm

I make the absolute maximum that the nitrite can be in that around 175 mg/kg. It's a gnat's above the EU max but still below the US one. I'd be perfectly happy to sit down and eat it.

Phil
User avatar
wheels
Global Moderator
 
Posts: 12894
Joined: Sat Sep 02, 2006 4:29 pm
Location: Leicestershire, UK

Postby Yannis » Sun Mar 25, 2012 8:25 pm

wheels wrote:I make the absolute maximum that the nitrite can be in that around 175 mg/kg. It's a gnat's above the EU max but still below the US one. I'd be perfectly happy to sit down and eat it.

Phil


Phil with "absolute maximum" do you mean that all of the nitrite is absorbed by meat ? If this is the case then it is 525mg/kg

BTW is there a formula to calculate the maximum amount of the nitrite in a brine that can be absorbed by meat ?

Yannis
.
I don't want any of your statistics; I took your whole batch and lit my pipe with it. Mark Twain.
User avatar
Yannis
Registered Member
 
Posts: 95
Joined: Tue May 17, 2011 10:46 am
Location: Athens, Greece

Postby wheels » Sun Mar 25, 2012 10:58 pm

Yannis wrote:
wheels wrote:I make the absolute maximum that the nitrite can be in that around 175 mg/kg. It's a gnat's above the EU max but still below the US one. I'd be perfectly happy to sit down and eat it.

Phil


Phil with "absolute maximum" do you mean that all of the nitrite is absorbed by meat ? If this is the case then it is 525mg/kg

BTW is there a formula to calculate the maximum amount of the nitrite in a brine that can be absorbed by meat ?

Yannis


I based the 'maximum' of the level of nitrite that would be in the meat at equilibrium.

Phil
User avatar
wheels
Global Moderator
 
Posts: 12894
Joined: Sat Sep 02, 2006 4:29 pm
Location: Leicestershire, UK

Postby ped » Mon Mar 26, 2012 6:27 am

Phil, could you give a breakdown of your calculation so that I can understand, in the context of the meat weight that I am brining?

Many thanks
ped
Registered Member
 
Posts: 395
Joined: Fri May 08, 2009 11:03 am
Location: Kent

Postby wheels » Mon Mar 26, 2012 2:47 pm

I'll do that - come back to me if I've not remembered in a couple of days.

Phil
User avatar
wheels
Global Moderator
 
Posts: 12894
Joined: Sat Sep 02, 2006 4:29 pm
Location: Leicestershire, UK

Next

Return to Brine cured meats

Who is online

Users browsing this forum: No registered users and 0 guests