Juicer base motor to Grinder Conversion idea

Where to buy, how to use. Stuffers, casings, spices, grinders, etc.

Juicer base motor to Grinder Conversion idea

Postby JLPicard » Tue Aug 07, 2012 5:24 pm

I have like 4 vege/fruit juicers that are sitting around collecting dust. I've picked them up over the years here and there. I had the idea to use one of the Juicers I have called a Champion Juicer: http://www.championjuicer.com/product_info.php?cPath=3&products_id=14 and convert it to a meat grinder.

The question I have is about RPM's. The juicer is quite fast at 1725 RPM with a robust 1/3 HP motor. What is a typical RPM for a meat grinder?

I think I will probably have to build a RPM reduction system, with pulleys to get the the lower RPM's of a meat grinder.

My current grinder just can't handle the load I like to put it under.

Found this link: http://www.sausagemania.com/grinder.html
Last edited by JLPicard on Tue Aug 07, 2012 7:13 pm, edited 1 time in total.
JLPicard
Registered Member
 
Posts: 107
Joined: Mon Dec 26, 2011 4:33 pm
Location: Ohio, U.S.A.

Postby Wunderdave » Tue Aug 07, 2012 5:47 pm

It seems like meat grinder motors have to put out a lot of torque, it would probably take some creative gearing to transfer the high RPM output of a juicer to this application. I suppose it could be done, though.
Wunderdave
Registered Member
 
Posts: 491
Joined: Sat Jul 02, 2011 9:12 pm
Location: Golden, Colorado

Postby DiggingDogFarm » Wed Aug 08, 2012 5:58 pm

They used to make a meat grinder attachment for the Champion.
They're on ebay occasionally.

Here's one along with the machine:

http://www.ebay.com/itm/Vintage-Champio ... _540wt_956

~Martin
User avatar
DiggingDogFarm
Registered Member
 
Posts: 446
Joined: Wed Jan 25, 2012 5:38 am
Location: Finger Lakes Region of New York State

Postby JLPicard » Wed Aug 08, 2012 6:15 pm

Thanks for the info, I didn't know Champion made an attachment to grind meat. However, I couldn't imagine running that thing at 1700 RPM grinding meat without some sort of gear reduction.
JLPicard
Registered Member
 
Posts: 107
Joined: Mon Dec 26, 2011 4:33 pm
Location: Ohio, U.S.A.

Postby DiggingDogFarm » Wed Aug 08, 2012 6:45 pm

Why not sell the juicers and put the money toward a real grinder?


~Martin
User avatar
DiggingDogFarm
Registered Member
 
Posts: 446
Joined: Wed Jan 25, 2012 5:38 am
Location: Finger Lakes Region of New York State

Postby buckeye » Fri Aug 10, 2012 12:24 pm

I am useing a 1/2 hp 1725 motor with a 40:1 gear reduction. Works great, its just fast enough and it never stalls. Not a good pic.

Image
buckeye
Registered Member
 
Posts: 18
Joined: Wed Jul 14, 2010 4:57 pm
Location: Ohio

Postby JLPicard » Fri Aug 10, 2012 2:33 pm

What is that gear reducer out of ?
JLPicard
Registered Member
 
Posts: 107
Joined: Mon Dec 26, 2011 4:33 pm
Location: Ohio, U.S.A.

Postby Wunderdave » Fri Aug 10, 2012 3:35 pm

buckeye wrote:I am useing a 1/2 hp 1725 motor with a 40:1 gear reduction. Works great, its just fast enough and it never stalls. Not a good pic.

Image


This is such a manly photo.
Wunderdave
Registered Member
 
Posts: 491
Joined: Sat Jul 02, 2011 9:12 pm
Location: Golden, Colorado

Postby buckeye » Sat Aug 11, 2012 10:43 am

JLPicard wrote:What is that gear reducer out of ?


It came from some kind of dough rolling contraption from a bakery that closed here. I have seen others on ebay.
Where are you in Oh. I used to work with a guy named Picard. Im in Ashtabula.
buckeye
Registered Member
 
Posts: 18
Joined: Wed Jul 14, 2010 4:57 pm
Location: Ohio

Re: Juicer base motor to Grinder Conversion idea

Postby wdabrowski » Sun Dec 10, 2017 8:02 am

The first few turns will be very tight, but once it starts turning a few times it will loosen up. While doing this the jar should be upside down with a little oil under the rubber plastic motor coupling to lubricate the mixie mixer grinder jar blades.
User avatar
wdabrowski
Registered Member
 
Posts: 4
Joined: Sun Dec 03, 2017 9:24 am
Location: Ambridge


Return to Equipment & Supplies

Who is online

Users browsing this forum: No registered users and 2 guests